SIEMENS

The Siemens 141-0520 Building Technologies 1410520 Thermostat Remote Bulb 6' Capillary 20 to 120 degr is a remote control thermostat that allows you to change the temperature in your home or office...

The Siemens 141-0522 Building Technology SPDT 50/150F SurfMtChagovrStat is a switch that is used to control the power to a device. It is a SPDT 50/150F switch that is used to control the power to a...

POWERS POSITIONING RELAYThe Siemens 147-2000 Positioning Relay has been designed as a replacement part for POWERS Pneumatic Damper Actuators. The part is a silver relay that requires installation by...

120/240V 3/12A Motor StarterThe Siemens 14CUC32AA is a 3/12 Amps motor starter with an automatic reset built to fit all NEMA frame sizes. A1 frames are 1-1/4" smaller in length and width than a...

The Siemens 14CUC32BA heavy duty motor starter is a solid state overload motor starter that features an auto/manual reset, open type enclosure, and a NEMA 1 general purpose enclosure. This motor...

The Siemens 14CUD32AA Heavy Duty Motor Starter is a solid state overload motor starter that is auto/manual reset and open type. It has a standard width enclosure and is 3 phase, 3 pole, 0 NEMA size...

The Siemens 14DUC32AA Heavy Duty Motor Starter is a solid state overload motor starter that is auto/manual reset and open type. It is standard width enclosure and has a 3 phase, 3 pole, 1 NEMA size...

The Siemens 14FUF32AA Furnace is a 3PH, 45 Amp furnace that is Nema Size 2. It is a solid state overload furnace that has a Nema motor starter. This furnace is not enclosed and is meant for use with...

The Siemens 14FUF32BA Heavy Duty Motor Starter is a solid state overload motor starter that is designed for use with 3 phase, 3 pole, 2 NEMA size motors. This starter features an auto/manual reset,...

"TubLoop W/PlugInAdpt 1/4""10pak"TubingLoop WithPlug-inAdapter 1/4"10pakThe Tubing Loop W/PlugInAdpt provides easy access to fluid lines, gas lines, and electric lines when you need to remove,...

This is a 5/32" TygTubeW/Coup & Union 10pcs. This is a connector for use with Siemens 192-505 Building Technology.

The Siemens 192-759 Building Technology TSTAT Needle Probe is a precision instrument used to measure the temperature of a surface. It is used in a variety of applications, such as HVAC, building...

The Siemens 656-601 Repacking Kit is a three-way repacking kit that is normally open or normally closed. It is designed for use with the Siemens 656-601 Building Technologies 656601 Repacking Machine.

The Siemens 192-208 Thermostat Pneu Dual Setpoint Direct Act Heat Reverse Act Cool 2-pipe is a thermostat designed to control the temperature of a room. The thermostat has two setpoints, direct act...

The Siemens 832-178 calibration tools are used to calibrate and verify the performance of measuring instruments.