Broan
Broan S0969B000 Broan 0969B000 Ceiling Heater Heat Element
Genuine NuTone 0969B000 Heater Element. The 0969B00 heater elements work with the following NuTone heater models: 605RP, 660RP, 665RF, 665RP, 665RSP, 9965-R02.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountThis is a genuine No one replacement heat motor-only to be used with models: 605RP, 660RP, 665RP, 665RF, 665RSP. Motor specifications: 120-Volt, 0.42A, 60HZ.
This is a genuine replacement heat motor-only to be used with models: 605RP, 660RP, 665RP, 665RF, 665RSP. Motor specifications: 120-Volt, 0.42A, 60HZ. This motor may also be used as a direct replacement on the following models: S806SP, S808SP, S812SP Broan Model Nos. 670RB and 670RBO Diameter is 5 1/4 in., length
Replace your worn out or broken heat motor in a Model 605RP, 660RP, 665RP, 665RF, 665RSP Attic/Roof Mounted Exhaust Fan. Solve your problem once and for all with a BROAN replacement attic fan motor.
Shop for a replacement heat motor for your broan 605RP, 660RP, 665RP, and 665RF, 665RSP model attic fans.
Broan attic fan motors are dependable and easy to install. The S88569000 heat motor-only mounts in minutes with the existing mounting hardware from the original motor. Color randomly selected. Fits models: 605RP, 660RP, 665RP, 665RF, 790SA, 890SA, 895SA, and 695RFZ.
This is a replacement heat motor for the following Broan ventilator: 660RP Roof Venting System on a Base. 665RP Roof Venting System on a Base. 665RF Roof Venting System with Flashing Damper with Recess Window. 665RSP Roof Venting System with Flashing Damper with Recess Window & Panel. Please refer to your installation and safety instructions prior to installing this part and call BSH Service for any guidance you need **
This motor is for Broan model 665 RP fans. It fits several models and specifications are included, but depending on the year it may not fit your exact model. This motor will replace part 605RP 665RP 660RP 665RF 665RSP .
The Gable Industrial attic fan motor is a pre-assembled, through the wall fan and motor assembly. The top mounting plate provides access to the top of the fan opening through a removable panel. The electrical box (ready for wiring) front cover is attached directly below the front edge of the mounting plate. This product fits standard J-Boxes. Box size: 2-1/2 x 3 x 11-1/4. Motor specifications: 120-Volt, 0.25 Hp