"2 GrooveSheave 6.48""DIA CI"
2VP71X 1.5" Variable Pitch Sheave, 2 Groove, Finished Bore, Cast Iron Sheave, for 4L or A, 5L or B, 5V Section Belt
Fits 4L and A, 5L and B, 5V belts.
Browning's 2VP71X Variable Pitch Sheave is ideal in applications where extreme reduction at high speed is required and power loss must be minimized. The sheave features a 1-5/8"" diameter and has been designed with a cast iron construction. It features 2 grooves that are spaced 7.1"" apart which allows the belt to pass over the sheave at the desired angle. This sheave provides maximum efficiency when used in a Browning Automated Belt Tensioner System.
The Browning Variable Pitch Sheave 5L/B is a 1.5" diameter sheave with two grooves, finished bore and cast iron construction. It is designed for use with a 5L or B-section belt and has an operating speed of 1750 ft per min and an operating temperature range of -76 to 212 degrees F.
""For use with A,B and C section belts. For use on 5L, 3V and 4L sheave pulleys.
This Browning Variable Pitch Sheave has a finished bore for belt drive applications. It is made of cast iron and has a compact design for high strength to weight ratio and low inertia. The Browning 2VP71X 1 5/8 Variable Pitch Sheave, 2 Groove, Finished Bore, Cast Iron Sheave, for 4L or A, 5L or B, 5V Section Belt has a sheave inside diameter of 7.1 inches and weighs approximately 26 lbs. This product is made in the United States.
The 2VP71X 1 5/8 Variable Pitch Sheave from Browning is a durable sheave with an iron finish and cast iron construction. This sheave is used in conjunction with a variety of belts ranging from 4L to A and 5L to B for a wide range of applications.
The Browning Variable Pitch Sheave is used on the deck side of a V-belt drive system. The two grooves are used to accommodate belts up to 5/8" wide and to switch from a 4L or A (4 wide) belt, to a 5L or B (5 wide) belt, the belt does not have to be removed from the sheave.