Browning 2TB136 Split Taper Sheave, 2 Groove for A or B section Belts, uses Q1 Bushing

"2 Groove Sheave

Taper mount sheave designed to be mounted on the aft end of a A or B section belt. Used for 2 groove belts. Manufactured from cast iron with a bronze bearing surface for added durability."

The 2TB136 is a split taper sheave, 2 groove for A or B section belts. It has a single bushing size of 1/4" Q1."

A Split Taper sheave is mounted on the back of the head and accepts a straight groove belt. The body of the sheave rides freely on the kirb on the boat, while the taper at the sheave end guides and supports the belt. Browning 2TB136 Split Taper Sheave, 2 Groove for A or B section Belts, uses Q1 Bushing

This Browning split taper sheave has a 2 groove and is ideal for use with A or B section belts. Use this sheave in combination with the Browning bushing Q1 to mount on a boat winch. This sheave will fit a 4" shaft."

Our Split Taper Sheaves are designed to fit directly on the output shaft of our A or B sections. The 2 drive grooves allow you to use this sheave for pulling or pushing applications. These are heavy duty, but can be used for light duty applications. They can be used with 2 BXA A or B sections in series."

This two-grooved, split taper sheave is used for CNC and manual belt or chain drives. It

Browning sheaves take up less space than a standard 5 groove sheave and are an excellent choice when additional line capacity is not required. The Split Taper sheave is the same as the traditional Taper Sheave but has been shortened and split for easier installation. Width number indicates size in inches and may be either metric or standard measurements. Belt thickness number refers to item width in inches. Browning Split Taper Sheaves use Q1 type bushings."