Browning 2VP42X 1 1/8 Variable Pitch Sheave, 2 Groove, Finished Bore, Cast Iron Sheave, for 3L, 4L or A, 5L or B Section Belt

"2 GrooveSheave3.95""OD

Browning Variable Pitch 2VP42X 1 1/8 2 Groove Sheave 3.95""OD, Finished Bore, Cast Iron Sheave, for A, B and C Section Belts Tractor Mounted.

This Browning "B" 2VP42X variable pitch sheave (2.95"" outside diameter) fits the 3, 4 and 5L (3/8", 7/16" or 1/2") section class "A" or B type roller chain belt on older model B, V or K series PTO clutch driven Flow Drill pumps. It can also be used with a 3L section standard"" width roller chain belt. The sheave has a finished bore for rigid shaft sold separately below. The sheave has a solid cast Ironton made from 3 1/8"" diameter bar stock plate with

This sheave has a diameter of 3.95" and is designed for use with A, B and L sections.

Adds more pitch to your existing groove sheave used in your 3L, 4L or A, and 5L or B section belts. Sheave has a finished bore for smooth operation. Each new sheave includes the following components: Adjusting sleeve No. 6A-5129 , pRotor No. 6A-5158 , Cast iron sheave.(NOTE) The 2VP42X variable pitch sheaves are only recommended for use on 2"" drive shafts with a maximum horsepower rating of 50hp."

Our Browning 2VP42X is a 1.1" Variable Pitch Sheave for 1.72" to 2" belts. All of our sheaves come in a variety of Groove and Bore combinations to suit your application. This particular sheave is a 2 groove and a finished bore with cast iron construction.

The Browning 2VP42X Variable Pitch Sheave, 2 Groove, Finished Bore, Cast Iron Sheave is a sheave that offers the user the chance to match the pitch of the line at the same time as the line is guided through it.

The Browning 2VP42X Variable Pitch Sheave allows the operator to vary the pitch of a 3L, 4L or A; 5L or B section belt by altering the belt tension. This item will fit in a 3"" A.D. Pulpit. This leather covered sheave is machined from cast iron.