Browning VPS-116 M Pillow Block Ball Bearing, 2 Bolt, Setscrew Lock, Contact and Flinger Seal, Ductile Iron, Inch, 1" Bore, 1-7/16" Base To Center Height

VP/VF/VT-1 PILL/FLG BLKS

The VPS-116 Pillow Block Ball Bearing is a functionally equivalent replacement part for older Dayton and Union Contact and Flinger units. The VPS-116 may look different than the original unit, but it will fit your drive without modification. This pillow block can be used with 1", 2.5" and 3" diameter tapered roller bearings, and has mounting holes to mount directly to a shaft. Unit comes with one setscrew lock bolt, two (2) built in grease fittings (#G050), & no flingers or seals are included.

Step up to the VPS-116 Pillow Block. The VPS-116 features a 11/16" bore, and bases were milled after plating for precision accuracy. This block is flinger sealed, and comes with a setscrew lock. It also has an adjustable contact seal and latched cover for added protection. The Browning VPS series is forged from ductile iron for superior strength and durability. Available in inch and millimeter sizes."

The VPS-100 Series pillow block ball bearing, 2 bolt, setscrew lock, contact and flinger seal, ductile iron are suitable for use wherever a deep-groove ball bearing is required in the electric motors of high-speed machinery or any device where perpendicular mounting space is limited.

The VPS-116 is a totally sealed pillow block bearing. The two piece design makes it easy to clean, and provides better sealing than many conventional designs. Available in metric and inch sizes, the bearings can be ordered with or without ductile iron flings, with or without contact seals, and with or without setscrew locks. The bearings feature a 1620 unnumbered contact and flinger seal.

Browning's VPS-116 M Pillow Block Ball Bearing, 2 Bolt, Setscrew Lock, Contact and Flinger Seal, Ductile Iron, Inch, 1" Bore, 1-7/16" Base To Center Height is a configurable component and should be ordered as needed. This product has shipping restrictions: please check if this item can be shipped to your country before ordering.

The Browning V-Series Pillow Block Ball Bearing, 2 Bolt, Setscrew Locks, Contact and Flinger Seals from Browning is used to support a wide range of attachments. The specialty ball and flinger/contact seals ensure reliable contact and dispersion capabilities, making this pillow block suitable for wet locations. This 2-bolt pillow block features an inch bore and 17-7/16 inch base to center height.

VP-Series bearings feature a contact seal, a flinger, and a 1/16 inch steel backplate. The bearings have an inner ring fitted into the flinger area and require two mounting bolts to lock in and spread the load across the bearing. They are externally mounted.