HONEYWELL C6097A1095 C6097A1095 GAS OR AIR PRESSURE LIMIT SWITCH NP

GAS OR AIR PRESSURE LIMIT SWITCH NP

C6097A1095, C6097-A1095 Gas or pressure switch , GAS OR AIR PRESSURE LIMIT SWITCH, with 6 inch wire leads, Adjustable pressure limit up to 30 psi but factory set to 15 psi (100 kPa), Adjustable gas limit, ENHANCED FLAME LIFT OFF DETECTOR FOR SAFETY

This Honeywell Gas or air pressure switch limits the inlet air pressure to the burner to 5 inwc (75.3 kPa). Also, the unit limits the gas pressure to 60 psig. Easy to install and made of metal for durability. Features: Compatible with natural gas and liquefied petroleum gases, For use with low flames (under 2,400 Btu/h), 6-in wc limit switch product provides proper flame height adjustment, Easy access adjustment knob allows

The HLZ-501 Limit Switch is used in applications that require the use of either an air or a gas pressure control. Simply select the desired function and appropriate wire connection to the controller or motor. Commonly used to switch light loads on,off and at set pressures.

This switch is used to safety control the air or gas pressure supply. It is designed to monitor pressure and shut off supply to the system?s governor for the purpose of overpressure protection.

Honeywell's C6097A1095 or C6097C1095 is a gas pressure switch designed to shut off flow of natural gas, propane, or air in the event that pressure falls below 0.2 psig and increase flow of gas as pressure rises above 0.8 psig. The C6097A1095D includes a male M20 x 1/4" NPT LP (liquid petroleum) threaded inlet connection and female M20 x 1/4"

For the monitoring of gas or air pressure in boilers.

Honeywell pressure limit switches are used to mechanically limit or protect against over pressurization of products that must be sealed to prevent dangerous effects of overpressure. The switches are used in systems with sufficient overpressure protection such as relief valves, rupture discs, or bursting disks, etc.