HONEYWELL C7031D2003 C7031D2003 5" immersion sensor with well for h

5" immersion sensor with well for h

The Honeywell 5" immersion sensor with well for hard-wired applications is designed for corrosion protection. The immersion depth can be adjusted from 1" to 12". This sensor is best for the hard-wired applications in various industries, including chemical plants, food processors and pharmaceutical facilities. This sensor's well design allows you to install this sensor in the process without worrying about being affected by the corrosive materials.

This Honeywell 5" stainless steel immersion sensor with well for hot water applications is a direct replacement for 3/4" or 1" threaded models. It can be used with traditional valves, as well as th

The C7031D2003 is a 5" immersion sensor with well for hot water applications. The standard thermostat is single stage, 10000 ohms at 25-75°C (77-167°F).

Honeywell C7031D2003/C7031D2043 5" immersion sensor with well. Fits most Honeywell 3-wire solenoid valves: VE1, VSK4, VS3, VS4, VS6, RH56H/TH and H2155S.

The C7000 Series Immersion Sensor Detectors are suitable for controlling an irrigation application or other applications for which a 5/8" Minimum Cover is required.

When you use this Honeywell replacement immersion sensor in your sinkless faucets, the computerized check valve will shut off water flow to prevent water damage to the fixture. Look for the Honeywell brand for quality and reliability.

The C7031D2003 is a single-use device that has the capability to measure flow rates of up to 200 GPM, and submersible depths up to 500 ft. It features a recessed top flange that allows an aboveground installation, along with a separate cap that acts as a sensor well to protect the surface from contamination and damage.