DUCT SENSOR REPLACES C7031C1031
Honeywell's Duct Sensor replaces the C7031C1031. It is an uncalibrated sensor that measures temperature between 32 and 220 degrees Fahrenheit. It is compatible with ADC, Actuator, Thermostat, and several other thermostats.
This sensor is made to replace the Honeywell C7031C1031 20K ohm sensor and suitable to replace OEM part numbers C7031C1031, C7016s103 and T8521F4P3. It measures the temperature of heated air in a duct. The temperature sensor works as replacement for both 3 wire and 4 wire sensors used in heating systems, such as furnaces, boilers, air conditioners etc.
The Honeywell 18 inch duct sensor works with both the IAQ and the RLA series of thermostats giving you even greater temperature sensing versatility. The C7031C1031 is an NTC (Negative Temperature Coefficient) element used to sense temperatures around 180°F to 250°F.
The Honeywell® C200UC1031 compatible, NTC Temperature Sensor is designed to be inserted into the duct. It will provide a temperature signal for use in terminal conditioning and control systems. The sensor is constructed with a nickel coated thermistor, allows an ultra-compact design and complies with UL/CUL and EN 60751-1 standards. The NTC sensor's nickel coating protects it against corrosive gases from the combustion process.
Convenient, easy-to-install duct sensors measure discharge from the air duct. Plastic housing resists humidity and corrosion. Resistant to alcohols, oils and most solvents. For use with HED5512C or HED6012C humidity sensors.
Honeywell Temperature Sensor, 18 in Duct Length (12164), Discharge Duct Fitting, DDM4 Connection
A temperature sensor is required for the humidifier to operate. The duct sensor can be used for all forced air systems including boilers with modulating gas controls and baseboard heaters.
Free Shipping
In stock
