Honeywell 113845 20K ohm NTC Temperature Sensor with 12 foot insert

20K ohm NTC Temperature Sensor with 12 foot insert

The Honeywell 113845 20K ohm NTC Temperature Sensor with 12 foot insert is a sensor that is designed to be used in heating, air-conditioning and refrigeration equipment. The sensor is made from nickel-chromium-iron (NiCrFe) materials, which fit the standards set for this type of equipment for accuracy and emissivity.

The Honeywell 113845 is a 20 K ohm NTC Temperature Sensor that comes in a convenient 12 foot insert. NTC stands for negative temperature coefficient and is a sensor that changes resistance based on its surrounding environment. These temperature sensors are built to be used with building automation systems, and can be used as part of your heating and cooling system to monitor room temperatures.

The Honeywell 113845 20K ohm NTC Temperature Sensor 2 Pack offers the same exceptional quality as other Honeywell sensors. Proudly made in the USA, these sensors are designed to convert temperature into numeric values. The NTC-type thermostat is suitable for a number of applications. It's great for air ducts, piping and machinery that can monitor engine temperatures.

This sealed 20K ohm NTC thermistor is used to measure temperature in the range of -40C to 160C (-40F to 320F). The NTC thermistor has a positive temperature coefficient of resistance and the resistance changes with rising or falling temperature.

The Honeywell 20K ohm, NTC Thermistor Type PT100 RTD Sensor offers superior accuracy and long-term stability. Operating over a -55 °C to +125 °C temperature range, this high temperature probe offers resistance changes that are linearly proportional to temperature changes. This sensor is ideal for any application that requires high temperature measurement, such as burnout ovens, conveyors, and furnaces, and is also suitable for use in ambient temperatures for refrigeration control.

A temperature sensor with a wire lead terminating in two bare wires and designed for use in heating and air conditioning systems. The sensor has an operating range of approximately +32 Degrees F to +158 Degrees F, a nominal resistance of 20K ohms at 77 Degrees F, an end terminal connection of 0.25 inch quick tap terminals, and is 16 inches in length. The sensor has a body diameter of .40 inch., a lead length of 12 inches, and is black in color.

This NTC ( Negative Temperature Coefficient ) temperature probe with protective braided shield is rated at 20 kOhms at 25°C. The resistance varies as the temperature varies, increasing by approximately 3.0% per 1°C at higher temperatures. It has a rated working voltage of 275V AC and a maximum current rating of 50 mA. .