Honeywell 66868 Wall Mount CO2 Sensor, Without Display, 0/2-10Vdc or 0/4-20MA Output.

CARBON DIOXIDE SENSOR, WALL MOUNT,

The 66868 Wall Mount Carbon Dioxide Sensor has a simple to connect plug. The sensor can be mounted in an enclosure or left exposed and monitored with a Display, Module (63031), or Insteon.com account. This wall mount sensor is great for monitoring rooms and buildings where consistent CO2 levels are needed.

Installing the 66868 Carbon Dioxide Sensor by Honeywell provides a convenient way to monitor levels and temperature of indoor air. This wall-mountable sensor features an easy-to-install mounting bracket with screws, and offers a wide level of flexibility for almost any application. Place this Wall Mount Carbon Dioxide Sensor in any home or office space to create a more comfortable breathing environment and prevent unnecessary loss of productivity.

The Honeywell 66868 Carbon Dioxide Sensor is a wall mountable sensor that measures ambient room carbon dioxide levels. It has two outputs, the first is a 4-20mA output and the second is a 0-2Vdc output. The 66868 has an operating distance of 32 feet (10 meters) with approximately 5 foot (1.5 meter) signal curve at full range.

Hardwired wall mount carbon dioxide sensor senses CO concentrations from 0 to 10,000 ppm. Automatically reports as parts per million (PPM) in units of volume or parts per million by weight (PPW) in units of mass.

Carbon monoxide, or CO, is an odorless and colorless toxic gas that can build up in your home. The Honeywell 66868 Wall Mount Carbon Dioxide Sensor monitors carbon dioxide levels in the air using a 0 to 260 ppm sensitivity range. The sensor features an integral back mount frame with built-in mounting hardware, plus a 10 foot cable to connect the sensor for a quick installation.

This wall-mountable carbon dioxide sensor monitors indoor air quality by detecting high levels that may indicate a build-up of dangerous CO2. It features an alarm setpoint range from 0-2000 ppm and has a zerosteric filter. It is suitable for use with all Honeywell ION Series wireless sensors (see ordering below), which will trigger an alarm on the controller or send a text message alert to your Android, iPhone® or iPad® device.

Use this wall-mounted sensor to detect carbon dioxide levels in an indoor area. The 66868 wall-mountable sensor responds from 0% to 5,000 ppm with an output that ranges from 0--10 Vdc for 0--5,000 ppm and 0--20 mA for 2,500 ppm or higher.