HONEYWELL C7915A1010 C7915A1010 Flame Sensor, Infrared (Lead Sulfid

Flame Sensor, Infrared (Lead Sulfid

Sensor, Infrared (Lead Sulfid (2-Pack)

The Flame Sensor, Infrared, Platinum is a high-quality replacement sensor for your cooktop, and meets all manufacturer specifications. Compatible with a variety of manufacturer models and part numbers, the Flame Sensor, Infrared, Platinum is an ideal choice for either replacing your old sensor or upgrading your cooktop.

The Flame Sensor has a rating of IP54 and is employed to detect fires in natural gas applications with multiple potential ignition sources. The Honeywell L8147 flame sensor is ideal for use with semiconductor sensors using lead sulfid detectors. Each Flame Sensor has a stainless steel mounting plate for strength and durability and will mount in any position.

Infrared lead sulfide (PbS) flame detectors are suitable for detecting flames generated by hydrocarbon or Halogenated gases. This detector is an unsintered FP-10IR lead sulfide flame detector with an uncooled PbS infrared sensor to detect the infrared radiation emitted by a fire. This detector has a laser welded-in internal lens for uniform detection, enhanced sensitivity, and longer response time.

The C7915A1010 flame sensor is a lead sulfide detector that uses the principle of energy storage to detect flaming and smoldering fires. The sensor’s flow of current is disrupted by radiant heat energy emitted by fires, effectively transmitting fire detection signals to a fire alarm system. Paralleling sensors provides redundancy in case of a defective sensor. The C7915A1010 can be used with any device that uses a linear current flow for indication purposes (for example, pull

This Flame Sensor is a safety feature. You can enjoy the convenience of remote control without worry that your safety is in jeopardy from a pilot light failure or blocked venting. The flame sensor will shut off your gas supply if a hot surface is detected. (Note: Do not use this sensor on LP gas, which has an average temperature of 600C) The KS5600 has the flame sensor included as part of the remote control system.

Honeywell Flame Sensors are very reliable devices designed to sense combustion and signal a control system to shut down the equipment before fire damage occurs. The sensing element is an optical pyroelectric infrared (IR) flame detector. When smoke, flames or gases of combustion are present, light is reflected back along the path of incidence. The detector's output is either "ON" or "OFF".If the sensor lens cover is removed, you can see that the inside surface of the housing is highly polished to