OTC OTC-3415 () CAN Test Box - Breakout Box and Protocol Detector.

CAN Test Box

It can read the results from various sensors or devices, process them further and send the data to another device such as a PC, printer or even a mobile phone

OTC Test Box can be used as a standalone unit, or can also be connected to a computer and used with a test program that allows you to perform advanced testing operations

You can use this test box to see what kind of data is being transmitted via CAN bus

Connectivity to an additional network is available using the included breakout cable

The tester box allows users to test the CAN bus without having to use the vehicle

This simple-to-use interface can be used with any device that utilizes the CAN protocol, including microcontrollers, PLCs, embedded systems and more

The OTC-3415 (CAN) test box is a standalone device that is used to locate, identify and decode signals on a vehicle’s Controller Area Network (CAN) bus

This small module can be used to build all sorts of test setups

CAN Test Box is a CAN bus protocol detector, it can help you to detect the protocol condition on your vehicle

It is used to monitor, isolate and troubleshoot problems on the CAN network

The OTC OTC-3415 (CAN Test Box) is a compact, high-performance interface device that supports the connection of multiple CAN devices to a single computer system

With easy-to-read LEDs and a user-friendly menu structure, it tests for CAN signals, messages, errors, and more

The device is designed to provide a simple platform for testing and debugging any variety of CAN enabled devices

Med Corp 3415 is a single board computer with its own built-in CAN interface and Ethernet controller

The OTC-3415 (CAN) test box is the industry standard for testing the CAN bus

The Box is a medium-sized, stand-alone test unit designed to perform a basic check of a CAN network for intrusion

OTC Test Box is designed to allow the user to verify the correct operation of a CAN device by using the new protocol detector

OTC Tester Box connects to the OTP-CAN interface and provides a direct access to all the diagnostic functions of this interface

The box can be combined with MedCorp CAN Protocol Detector (OTC-3414) or the MedCorp CAN Protocol Detector (OTC-3416)

The unit contains a number of pre-wired interfaces that can be used to connect between nodes on a CAN network and an oscilloscope or PC with the included software

The system emulates a Virtual CAN network, allowing users to test any CAN node

The OTC3415 CAN Test Box allows for complete standalone interfacing to the Sensel Morph, allowing for rapid prototyping of applications

The CAN Test Box is a device used to diagnose CAN network communication problems

The standard model has three external CAN ports for connection to up to three separate CAN buses or networks and one USB port for use with the included DYNAMIXEL AXIOM adapter board or other AXIOM adapters

The Med Corp 3415 runs Linux and is capable of talking to other computers, sensors, medical devices or just about any other smart device

The CAN Test Box is an Arduino-based tool used to verify the operation of both hardware and software that uses the Controller Area Network (CAN) protocol

The box is fully assembled and tested prior to shipment