CARLIN 320009 OIL PRIMARY CONTROL Features & Benefits Intermittent Duty Ignition 45 Second Trial for Ignition (TFI)

48245 PRIMARY W/SMART IGN

This CARLIN 320009 OIL PRIMARY CONTROL features: CARLIN Brand Primary Controller 48245 PRIMARY W/SMART IGNAL CARLIN 320009 OIL PRIMARY CONTROL Specifications: - Primary coil: Incoming 45 amp secondary fuse holder and Smart Ignition (S.I.) Assembly with 2-position rocker switch for primary application - Activate / standby position - DPDT snap switch for ignition input - Provide signal for spray, steam or dpdt relay coil to energize electrical..

The CARLIN 320009 PRIMARY CONTROL WITH SMART IGNITION converts a 120/240-Volt equipment into a 120-volt only system. Instead of using a continuous controller, this unit uses an intermittent electrical device to operate over a wide range of loads. The control is designed for use on oil burner units with 30 kW output and higher.

Maestro's Primacy series is the perfect combination of affordability, performance and quality.           - Energy Star Compliant     - Low Ambient Kit Includes: Electronic Ignition Module & GT-2 Sensor Kit     - Variable Speed Direct Digital Drive     - Auto Sync two Speed Blowers     - Primary with Smart Ignition TFI System

The CARLIN 320009 OIL Primary Control monitors the secondary circuit for 6 different faults and provides an interlock to protect the equipment against operator error. Equipped with a Smart Ignition TFI that provides a trial for ignition, this control is UL, CSA, IEC Compliant. Easy installation with only 2 wires to connect

Abbott CARLIN 320009 Oil Primary Contols are suitable for forklift trucks, log handling, and other industrial applications. They feature an intermittent duty ignition for maximum performance and dependability. Features include a 45 second trial for ignition (TFI) which ensures consistent power at startup, a thermal overload protection device which protects the unit from overheating and external shorting, a manual reset primary control switch and an auxiliary PTO.

The CARLIN 320009 Oil Primary Control is for use with up to 200 amps fuses in a number of different panelboards typically found in residential and light commercial applications. It can be mounted on an 11-3/4" wide panelboard. It also has a locknut setscrew which secures the primary and secondary fuse blocks in position. This control features a one row Buss style fuse block with brown color blades and a yellow striped shunt, which offers easy identification of the shunt positive lead. It comes with a cam-operated drop-out switch that provides 45 seconds of test time on uninterrupted

The CARLIN 320009 has a 3-wire primary wind module that features an intermittent duty function in regards to the conditions for this part. When there is no loss in the load, this ensures maximum energy savings and up to 15% lower specific fuel consumption than conventional constant firing systems. In addition, the ignition system (TFI) has a 45-second trial for ignition (45S/T).