CARRIER 294542 CRANKCASE HEATER 480V

CRANKCASE HEATER 480V

The CARRIER 294542 CRANKCASE HEATER 480V (MFG) is a dependable 480 volt heater and part of the CARRIER brand, which ensures reliable performance and meets or exceeds industry standards and all applicable codes. This CARRIER heater is designed to provide you safe, efficient, and convenient operation. For your safety and convenience, this product features an automatic ignition, ceramic-coated finned tubes, and uniquely-designed fan blades that pull in cool air while pushing out heat while it works hard to keep commercial spaces warm year-round.

The CARRIER 294542 is a genuine part with an affordable price. The CARRIER 294542 Crankcase Heater 480V features electric start, air cooled motor and black paint finish. The CARRIER 294542 parts from Caterpillar are built to do a job, work hard and last, not just collect dust on a shelf.

Sometimes you need to heat up a crankcase fast. That's when the Carrier Crankcase Heater comes in handy. Simply set it on the floor and wrap the jacketed thermal element around the motor or gear housing for fast heat. It operates safely on 480V phase power and draws only 1.7A of current to supply up to 3,400W radiant heat through its aluminum finned element and reflector assembly.

This Crankcase Heater is used to preheat diesel fuel in crankcases and tanks of diesel, gas, and turbine-powered vehicles and equipment. Essential in extreme winter conditions or when the outside temperature is cold, this heater consists of a protective housing with a painted steel base, an automatic reset thermal shutdown fuse, and a double break high/low limit switch.

CARRIER CRANKCASE HEATERS ARE GENERAL-PURPOSE, HIGH EFFICIENCY DRY-TYPE FURNACE HEATERS

The Carrier 294542 is a crankcase heater that is not big on complexity of design. This product makes use of a simple housing to securely hold the motor and provide adequate room for the bearings needed for operation. Not only does this provide an exceptionally strong product, it also provides an exceptionally affordable one when compared to its counterparts in the industry.

The Carrier Model 294542 indoor crankcase heater is designed to replace oil-fired models, as well as 200-, 208-, 220/480V 3-phase and 120/208V single-phase models. Each heater features a ducted evaporator design with 10" wire leads for connection to local power supply, gas valve and pilot assembly.

This product is easy to install and uses very little power for safe, dependable heating. It has a unique, compact design that is stronger than other crankcase heaters. The standard three bolt flange eliminates the need for a separate band clamp. The 1/4" thick fiberglass insulation blanket retains maximum heat in all seasons. The heavy duty fuse holder located at the base of the heater permits easy replacement or resetting.

For added comfort and convenience, the Carrier 5M95-355 Crankcase Heater is designed for use with the 5TN85, 5TN95, 5TM95 and 5TM85 series furnace models. It has protective screen cage to guard against menaces and an insulation blanket for energy efficiency and longer life. The variable start setting allows for year round use. It has a capacity of 264000 BTU/hr and is manufactured from high quality materials for greater durability.