Carrier 296658 - Bryant Furnace Draft Inducer / Exhaust Vent Venter Motor - OEM Replacement

INDUCER MOTOR ASSEMBLY

The Carrier 296658 For use with gas furnaces. The Inducer Motor Assembly includes the Inducer Motor and the Control Box, and is Factory Assembled. This Inducer Motor Assembly contains a Limit Switch which must be connected between the Inducer Motor and Control Box, and must be mounted in a non-combustible location within 18" of the furnace wall.

OEM replacement draft inducer motor assembly, 296658, for some Carrier and Bryant furnaces.

No matter what type of carrier style furnace you have, this inducer motor assembly will fit. It has a 4 wire harness and mounting brackets. If your motor is burned out or you want to upgrade to a better motor then this is the exact replacement for you.

The Draft Inducer Motor complete with draft inducer blower, mounting base & upper limit switch is the replacement of the original Carrier furnace draft inducer motor. This inducer motor is designed to replace old and/ or existing draft inducer motors on older Carrier furnaces. Easy installation with Factory wired On/Off Switch. Replaces part numbers: 142744-13D, 114525P4 & 296658.

Replace the defective inducer motor assembly in your Bryant Furnace model Number 296658 with this OEM assembly. This is a direct replacement, requiring no modification to fit the existing ductwork. The inducer motor has two wire lead terminals, you will also need to order and install an inducer motor control board.

The Carrier Bryant Furnace Draft Inducer/Exhaust Vent Venter Motor is an OEM replacement motor assembly that fits select furnace models for Carrier.

The draft inducer motor in this unit is not the original equipment. The vent motor will need to have a repair kit 180K70, Part No. 11127401, order and install prior to read installing this assembly.