Carrier HF680015 ACTUATOR MOUNTING KIT

ACTUATOR MOUNTING KIT

The Carrier ACTUATOR MOUNTING KIT is used to install an actuator in an existing heating or cooling system. The ACTUATOR MOUNTING KIT must be installed at the top of the terminal box enclosure to provide a level platform for the actuator and eliminate pinching of the wire connections made in the terminal box. To reduce installation time, Carrier offers this mounting kit which installs easily into existing electrical enclosures and does not require additional vents or modifications.

The Actuator Mounting Kit is used on Carrier rooftop air conditioning models R22, 24, and 35 Series to provide proper mounting for the low pressure cutout switches.

Carrier's Actuator Mounting Kit is a 1/2" thick, rust-resistant metal bracket plate designed to be used for mounting a wall thermostat. The mounting kit can be used in a variety of Carrier heating and air conditioning units.

This mounting kit attaches new actuators to select Carrier air conditioning products.

Designed to fit Carrier and Bryant furnaces, this actuator mounting kit is easy to assemble and install.

The Carrier HF680015 actuator mounting kit is designed to facilitate fitting the temperature actuator to the Carrier furnace. It is primarily composed of aluminum and consists of a bracket and four mounting screws.

The new Carrier climate control actuator mounting kit will allow the installer to mount the actuator to a wall or into a wood structure.