LP Pressure Switch
The Carrier HK02LB008 LP Pressure Switch is a replacement for the original. It works for propane, natural gas or dual fuel systems.
Pressure switch for lp gas. Pressures to 4500 psi. with material of brass, handle made of steel and aluminum, "brass-to-steel" interface; Life time rating at 10,000 cycles; with temperature range -20 to 50 deg C
The Carrier HK02LB008 is a pressure switch, It turns on and off the gas flow to the furnace based on the pressure in the tank, This accessory requires an existing outdoor gas supply line and an LP Gas Control Valve.
The HK02LB008 is a pilot operated pressure switch, being used for indicating high/low pressure of Gas/Steam and Refrigeration system by Magnetic Contacts and Pilot Light, it may be installed on a wall or ceiling.
Pressure Switch, Set Point (psig) 25, Connections 1/4-NPT Inlet/Outlet, Red/Yel
Pressure Switch, 12 PSI
Carrier Pressure Switches are designed specifically for use with system control valves on the gas side of air-cooled gas furnaces, combination gas/oil furnaces or heat pumps. The switches feature a snap-action SPST (single pole, single throw), normally closed contacts and include a variety of tap options that enable installation with 2/3- to 3/4-inch line connections.