CARRIER HK02ZB421 PRESSURE SWITCH FOR PRESSURE SWITCH FOR

High Pressure Switch

For use with Carrier Heat Pumps, furnaces, boilers, water heaters, evaporators and other gas/oil/electric heating equipment. High pressure switches are available for use with either Natural Gas (NG) or Propane (LPG). The high pressure switch should be installed in an accessible location; refrigerator/freezer should also be accessible for servicing.

The Carrier HK02ZB421 is an improved high pressure switch that ensures your AC is ready when the weather finally breaks. The HK02ZB421 sits in-line with your outdoor unit's refrigerant lines. It also positions the compressor clutch in the off position if it detects a leak, thus ensuring energy conservation. A quick way to replace this part is by taking the old switch off and pulling the new one in place. This switch is easy to install. Get your AC up and running with this part right away.

Honeywell's HK02ZB421 high pressure switch is suitable for use in air protecting and water sprinkling automation systems which demand long service period and high reliability.

Our high pressure switch has a universal design and is compatible with all brands of refrigerant flow switches. It may be used with a gas or liquid refrigerant circulating pump system. The wiring provisions are for two conductor wire . This switch must mate with a Carrier style float mounting hardware 079Z04704721 079Z04704721 079Z04825720 Carrier Float Switch Assembly

The Carrier HK02ZB421 Pressure Switch is designed for use with residential heating and cooling systems. It mounts onto the gas valve line, and when the gas pressure drops below the specified minimum (usually 10" or 14" W.C.), the switch trips to automatically shut off the gas flow to the system. This switch is housed in a sleek housing featuring a special paint finish that resists corrosion. The pressure switch is equipped with an adjustable high limit device.

Pressure Switch HK02ZB421, Air cooled; Pressure range: 0-15PSIG; Overload protection type: Thermoswitch; Connection size (in.): 1/4

The HK02ZB421/HK02ZB422 is a pressure switch for a home HVAC system. It protects the system from the burner operating at pressures that can cause damage. The pressure sensor's location in the furnace permits the installer to use one room air duct for two or more heating

Pressures Switch for pressure gauge. ---Inlet port 1/4"NPTF Inlet Inline Inlet Inline -3/8"BSPT Outlet 1/2"BSPT

It is made of plastic. It is in the form of HXSN series. It can working in pressure range between 0,05Mpa-0,5 Mpa positive pressure. Its average life expectancy is 100000 cycles.

This is a two-stage pressure switch. It can be used for wide range of applications such as blow gun, spray painting equipment, pressure washer or fire fighting equipment.

Pressure switch is threaded to LPH03-2.5 Hose.

Comparable Products Used In Refrigeration, the Heat Pump Components the Air Conditioning/Climate Control Industrys Carrier HK02ZB421