Carrier HK05ZZ001 DISCHARGE PRESSURE TRANSDUCER

DISCHARGE PRESSURE TRANSDUCER

The HK05 Discharge Pressure Transducer ensures that oils and waste water are discharged under appropriate pressure. It is fitted on the discharge pipe between the pump and the filter. The Transducer monitors and tracks both temperature and pressure within the pipe and ensures that oil and waste water is discharged at appropriate pressure. Tank temperature is displayed in degrees C and psi (lb/in2).

Carrier HK05ZZ001 Discharge Pressure Transducer ensures that hydraulic fluid is not supplied to the Hydraulic Motor when it becomes overloaded, thereby protecting the motor from failure.

The Carrier HK05ZZ001 discharge pressure transducer is used on products including the Carrier 72H1A8JA01, 72H2A8JA01, 72H3A8JA01, 72H4A8JA01, 72H5A8JA01, 72H6A8AA01, 72H7A8AA01, 72H8A8AA01, 72HCB60060060060060060060060060060060060060060060060060060-C72CB-JKF-ACN Discharge Line Sensor. This part is NLA until

Pair this discharge pressure transducer with the carrier HK05AC100, or on its own, to collect discharge pressure on Carrier heat pump systems. With wireless capabilities, you can connect the CMM05WL000 on/off controller to the HK05ZZ001 for an easy interface into your Carrier system.

The HK05ZZ001 is a flat, non-inflatable pressure transducer for use in discharge pressure measurement. Its DC electrical output is converted to 4 to 20 mA dc-range by the matched signal conditioner (Optional) depending on applied specifications. The unit can be used with all standard BPS transducers, flow meters and metering pumps either integrally or as a retrofit. In addition, it can be directly attached to mechanical pumps for generic measurement purposes.

What's in the box: 1 discharger pressure sensor

The HK05ZZ001 is an electronic pressure transducer for use in monitoring the downstream HP pump discharge pressure. This sensor senses the pressure directly after the pump allowing it to sense differential pressure, pressure-loss across the filter, temperature changes, etc.

Carrier Air Conditioning Pressure Transducer HK05ZZ001

This transmitter module is used with Carrier environmental control products to monitor temperature and discharge pressure in a gas-fired system. The transmitter's LCD display shows the actual temperature and pressure readings--so you can know what's going on at all times.

Built for high-temperature, high-pressure environments, Carrier HK05ZZ001 is ideal for use in many industrial applications where the pressure of fluids needs to be monitored. This unit uses an OTS (On-The-Shelf) probe.

A variable displacement vane pump

Our Carrier HK05ZZ001 is a gas-fired , hot-water boiler, specially designed for use in residential and light commercial applications. It has a maximum input capacity of 36,000 Btu/hr. It also has a digital display for easy monitoring of burners, status codes and other important information.