Carrier HK06NB017 PRESSURE SWITCH

PRESSURE SWITCH

The HK06NB017 pressure switch is designed for Carrier/Bryant/Payne air-conditioning equipment. The HK06NB017 Pressure Switch is a factory original replacement part. Use the jumper harness to test continuity of the pressure switch. It has 7 Terminal Connections .

Pressure switch has a built in single-point pressure switch that trips at the preset pressure level. The switch may be manually reset.

The Carrier HK06NB017 pressure switch is a wall or pipe mounted non-booster electronic pressure switch. It will shut off the gas supply to your heating appliance when the pressure drops below your setpoint. The carrier hk06nb017 is fast acting and durable. This pressure switch will protect your gas fired appliance from excessive pressure caused by excessive water flow due to scaling or hard water build up in well water and from excessive pressure upstream from the dwelling.

Pressure switch is a valve that closes when water pressure falls below a certain level. It is a simple device used for testing the flow of water or air and it can be connected to...

Pressure switches are used on many gas-powered grills. The switch turns the gas valve off and on when the cooking temperature is reached in order to control the burner.

The Carrier HK06NB017 Pressure Switch is an essential part of a filtration system. This switch, which attaches to a furnace's air ducting, monitors the pressure in the ducts and automatically turns on the furnace blower when carbon-monoxide levels reach dangerous highs. The inclusion of this switch is vital to the system's effectiveness.

A pressure switch controls the furnace blower motor. A low pressure switch trips above a set pressure. A high pressure switch trips below a set pressure. Carrier switches are for gas, oil or propane furnaces only.