CARRIER HN53HF122 HN53HF122 CONTACTOR THREE POLE CONTACTOR THREE POLE

CONTACTOR 75 AMP 120V COIL

The Carrier HN53HF122 Contactors are three pole, single throw, twin coil current relays with copper alloy contacts rated at 75 amps 120 volt coil. The contacts are rated for 600Vac/dc maximum.

Contactor, heavy duty, 3 poles, 120 VAC, 75 Amp. Is a device that connects electrically separate circuits in an electric system together (see diagram below). The SC41F series are combination type AC contactors designed to switch heavy-duty air conditioning systems as well as smaller electric motors and solenoids.

The HN53HF122 contactor features a 480VAC coil, dry (non-lubricated) mechanical latching switch, and a 30VDC auxiliary coil for low voltage load control. The HN series contactors are used in the main disconnect for single phase services. It is a three pole contactor rated at 120V coils. This is a 1 of 22 series mount contactor. It has a voltage rating of 120 VAC and 75 amp contacts, with auxiliary coils rated at 30VDC or 28VDC. This contactor has two gangs with one common trip on the second gang and can

The HN53HF122 is a Single pole, three (3) coil contactor for 120VAC, rated 75A at full load with no contacts.

This item is a BRAND New Zenith Wide Range Contactor HN53HF122. It is sometimes refered to as a High Current Contactor, 3 Pole Contactor, or Relay.

The convenient three-pole design allows for cost-effective installation and operation. With its other applications, make this contactor an economical choice.

The Carrier HN53(HN53HF1) is a Three Pole Split Neutral Contactor without Disconnect Switch. Used to control air conditioners & heat pumps with a single phase compressor and either resistance type or permanent split capacitor type (208/230) outdoor fan motor or with a single phase motor operating an indoor fan coil unit blower. it is also used to control water heaters with gas burners.