Carrier P282-0331A 3P 30AMP 24V Contactor 3P 30AMP 24V Contactor

3P 30AMP 24V Contactor

The 3P 30AMP 24V Contactor is used to switch the main air conditioner motor (resistance of contactor coil: 10~16 ohm). It can be used in the system with the following main products:

Take charge with the Carrier® 3P 30AMP 24V Contactor. This device is made to show you the way for central air conditioning systems and will keep your home comfortable all year long. The thin-line design fits easily into walls and ceilings for an inconspicuous installation. It operates with a small microprocessor board that regulates current usage and voltage.

The Carrier P282-0331A 3P 30AMP 24V Contactor is a standard replacement product for use with compatible air conditioners. It helps switch high and low voltage current by means of a spring-loaded contactor.

The Carrier 3P 30A 24V Contactor has a current/full load rating of 30 amps at 240/277 volts. It is used in gas valve applications. This means that it will open and close gas valves electronically. It will control their operation by detecting the demand for heat and cutting off the gas supply when the heating operation is complete.

This is a brand new 3 phase 30/60 amp 240 volt contactor, model number 282-0331A, made by Carrier.

The P282-0331A is a 3 phase 30 amp 240. With its metal body and contacts, it's fully enclosed to protect against moisture and contamination. Tested and listed as CSA certified for Canada and U.S. Plugs are included. A Central Fuse is required with this unit as a replacement. The Central Fuse supplies higher fault current protection for the C281 series of contactors. Fairbanks offers low voltage, medium voltage, high voltage, overload, molded case, miniature, time delay, microprocessor controlled or simple manual changeover contactors for both AC and DC applications.

The Carrier Contactor 180 & 230 volt 5-60 HZ 120/240 VAC 3 phase contactor offers short circuit and thermal overload protection, and shuts off power above the rated current to protect against excessive heating... In addition, the modular design and easy-to-follow instructions allow you to apply customized configurations for any application. The mechanical trip feature provides a fast method of opening circuits from a normally closed contact position, such as with thermostats or limit switches.