ICM Controls 123507 Variable Frequency/Variable Voltage Drive, Blower Speed Control, 208/230 VAC

VARIABLE FREQUENCY & VARIABLE VOLTAGE, DRIVE MOTOR

This variable frequency (controlled by the drive unit) and variable voltage (controlled by the external VARIABLE VOLTAGE & FREQUENCY CONTROL or optional wiring harness) direct-drive motor features a built-in, user adjustable, field weakening resistor. This allows speeds under 360 Hz to be varied from full speed to as low as 10% of rated speed, in .1 Hz steps. The MVFR123507 is used to drive positive displacement fans, blowers, compressors, hydraulic motors and other high power density loads at a variety of speeds. For command performance throughout the entire speed range of your application

The ICM Controls 123507 Variable Frequency/Variable Voltage Drive, Blower Speed Control, 208/230 VAC is a robust and reliable load center designed to monitor and maintain a reduced voltage drive motor. Easy to install, this device makes a standard variable frequency drive installation compatible with a 3 phase 208-230V split phase single phase motor, and helps in the reduction of energy loss in the installation. This ICM Controls 123507 Variable Frequency/Variable Voltage Drive, Blower Speed Control, 208/230 VAC comes with features like rugged cast aluminum design for added durability and long life for precise motor control under

ICM Controls 123507 drive is a Variable Frequency and Variable Voltage AC drive for 208/230VAC motors with 50/60HZ primary. The ICM Controls VV/VF Drive has the features found in industrial variable speed drives, such as soft-start, speed regulation, and motor braking. With a variety of alarms and protection feature, the ICM Controls VV/VF Drive can be used in a wide range of applications including conveyors, pumps, fans and other industrial or non-inddutrial applications.

Designed for ICM Controls' 123507 variable frequency and variable voltage drive, this blower speed controller is ideal for conveying systems in the non-submersible...

Control air volume with this ICM Controls 123507 Variable Frequency/Variable Voltage Drive. The product number for this ICM Controls drive is 123507. For the easiest installation, use the accessory kit provided by ICM Controls for your application. This ICM Controls drive is ideal for use in remote buildings and on outdoor locations. For a clean look, consider using an enclosure mounted with this ICM drive.

ICM Controls 123507 Variable Frequency/Variable Voltage Drive, Blower Speed Control, 208/230 VAC – This ICM Controls Variable Frequency/Variable Voltage Drive has a rating of 15.0 A. It was designed for the following: Small Equipment, Cooling Applications, Low Power-Factor Correction Applications. The maximum speed this Variable Frequency/Variable Voltage Drive can achieve is 20000 RPM.

The ICM Controls 123507 VARIABLE FREQUENCY DRIVE is suitable for blower applications. The OVERLOAD PROTECTION CIRCUIT BREAKER provides protection against motor overload & the UNINTERRUPTIBLE POWER SUPPLY(UPS) MONITOR provides protection against power surges. The stainless steel blade & mix head are constructed of 304 type stainless steel.