Honeywell 6677 , Inc. Thermostat Callibration Tool for TP970 Family.

TP970 ALLEN WRENCH CALIBRATION TOOL

The TP970 Allen Wrench Calibration Tool is an OEM factory replacement calibration tool for use when replacing batteries on Honeywell Residential Programmable Thermostats that use the TP970 battery. The TP970 Allen Wrench Calibration Tool has the same specifications as the original factory tool. The TP970 Allen Wrench Calibration Tool includes a set of 12 Energizer Lithium Coin Cell Batteries which will provide up to two years of battery life.

Allen wrench calibration tool for use with the TP970 family of thermostats. Calibration screws for mounting and indoor buttons not included. Tool is used only on models that are serialized without a calibration button, such as RC9050B. The TP970 family of thermostats is quick-calibrated by the user, so calibration should only be needed when a unit is installed in a new home, or if a problem occurs that prevents normal operation

Simply insert the Allen wrench into the TP970 tool and turn it-just like turning an ordinary screw. When you feel firm resistance, stop turning the Allen wrench. You have reached calibration. Keep the screws snug when not in use. This will reduce the risk of damage to electrical components and wiring.

This Thermostat calibration key, commonly known as the Allen Wrench, is used to adjust the Thermostat Registers of the TP970 family thermostats by allowing for individual optimum temperature settings in each room. The TP970TA thermostat requires digital service center calibration for optimal performance and energy efficiency.

Missing your professional grade tools? Well, not any more! Allen wrenches that were once only available to pros are now yours with the Honeywell Inc. 6677 , Thermostat Calibration Tool for the TP970 family of thermostats. This kit includes a TP970 (front pilot), four TP971 (large back nuts), four TP972 (large lockwashers), and two TP973 (small lockwashers).

To help make your TPW™ thermostat installation perfect, we've created this Allen wrench calibration tool. This tool is designed specifically to calibrate your Honeywell TPW™ thermostats for 0°F – 120°F temperature scale. Simply insert the tool into the two holes on the back of the thermostat and turn it until both blue triangles are at top and bottom and match up with indicators across the 0°F – 120°F marked lines.

The Allen wrench calibration tool is used to ensure the digital display on the TouchFlow® thermostats for the 971/972/973 (incandescent) and 975/976/977 (programmable) product family are set to accurate values. Any error in the values can lead to overshoot of set-point during operation, which causes unnecessary energy loss. The Allen wrench calibration tool is designed to eliminate error in user cross setting.