Century B625 A.O. Smith 3/4HP 3450RPM 115/230V Polaris PB460 Booster Pump Motor

3/4HP 230/115V 3600RPM 56CZ

The Polaris PB460 Booster Pump Motor is a perfect choice for premium quality and long lasting operation. This 3/4HP 115/230V 3450RPM 56CZ 115/230V pump motor has a horsepower of 3/4, and it's pumped volume per minute is 3600. This pump also features:

This A.O. Smith Polaris PB460 Booster Pump Motor is a 3/4 HP, 3450 RPM motor ideal for refrigeration, air conditioning and general circulation applications that require high volume pumping. It features a water cooled double ball bearing construction, 115 volts and 230 volts for both 115V and 230V applications that uses 3/4 hp motors. This A.O. Smith Polaris PB460 Boster Pump Motor is designed with a direct connected to AC induction motor with a 56CZ capacitor for efficiency, which in turn creates less heat in the motor, an aluminum gear pump ensures durability and longer life spans, and

The B625 3/4 HP 3450 rpm 115/230v submersible pump motor and dual vane impeller are designed for use with a variety of pumps. The B625 features an integral 115 volt stator with 3-speed capacitor run motors for pump control at low power requirements to high performance, vacuum, and peak up time applications. The close-coupled pump plate allows maximum unit mounting flexibility and is designed to fit in tight places where most pump models cannot be used. The integrated vent offers dry operation and includes a ground fault interrupter. The aluminum pump plates have a large flange/

Features: 3/4HP , 115/230V, 3450 RPM, B-Frame, Open flywheel (1-7/8 x 2) , K-Frame (1-7/8 x 2-9/16), Polypropylene shaft with integral bearings, Quick connect coupling for 1" poly suction hose.

The B625 is a 3/4-horsepower, 12.8 amps, 3450 RPM 115 volt / 230 volt centrifugal pump. When paired with the correct pump tank, this motor should provide sufficient capability while minimizing flow rate. The motor is made of cast iron and is designed to give years of trouble-free service.

The Century B625 3/4HP single-phase pump motor features a liquid-cooled design with horizontal shaft. The B625 Series is designed to operate at full load indefinitely without maintenance or burnout, so you can protect your investment. Its high efficiency and 56CZema single-phase, 208/230V induction motor leads to lower energy consumption and longer pump life.

A.O. Smith B625 7.5 HP 3450 RPM 115/230V 1Ph ?Cylinder Booster Pump Model PB460-065G is a booster pump with a straight centrifugal impeller mounted to the end of a shaft extending beyond its volute casing. The casing has an internal diameter that is 2½ times larger than the shaft. It has an oil reservoir at the top of motor which lubricates and cools it as well as reducing noise and vibration. The only connection between the drive shaft and motor is through the flexible coupling on the end of the shaft, which allows for misal