CF1-C1 FLOAT W/SS FLOAT & ROD
THE CF1-C1 FLOAT W/SS FLOAT & ROD FROM CLAVAL IS A PRODUCT THAT IS MADE OF POLYPROPYLENE, HAS AN OIL TIGHT INLET AND IS COLORED WHITE. THIS CLAVAL FLOAT HAD A SOFT TOUCH SCREEN ENSURING CONTACT IS NOT DAMAGED. THE HOSE HAS A WEBBING STRAP THAT KEEPS IT IN PLACE DURING USE.
This float is used with the Cla-Val Model 8905A Series II manual boiler. Float and rod assembly are made of stainless steel. Used in a bottom water supply application with coil balancers in natural draft burner installations. CF1-C1 FLOAT W/SS FLOAT & ROD
The Cla-Val 8901601J-OTC Float-Model CF1-C1 with Stainless Steel Float is used on a variety of hot water circulating equipment such as: domestic heaters, small commercial systems, pumping equipment, residential furnaces, and many other types of water heating and recirculation equipment
The Cla-Val CF1-C1 Float and Rod assembly is a Float & Rod for use with an air valve with MNPT x 3/8" connections. The float is adjustable for different pressures of gases. It fits into the control valve above the well vent eliminating the need for a separate air valve for different wells.
Cla-Val Model CF1-C1 Float, Suction, 305 Series (Open Tank)
This tank, equipped with an internal float and a stainless steel float/rod assembly, is designed for single-pipe residential water pressure systems. The rod, extending upward from the bottom of the valve, has a handle for manual operation of the check valve. The stainless steel float and its support bracket are attached to the end of the rod. Chamber dimensions are 13"W x 10"D x 4-1/2"H; valves have a 4" nipple outlet and 2" inlet port; stainless steel float rod extends upward from bottom of valve by 3-1/8"; ball height is 3". CF1
The Cla-Val 8901601J-OTC Float-Rod Assembly is a 1-inch and 1/2 inch pre charged diaphragm assembly with the hanger, swivels, rod interface and rod seal.
CF1-C1 FLOAT W/SS FLOAT & ROD
THE CF1-C1 FLOAT W/SS FLOAT & ROD FROM CLAVAL IS A PRODUCT THAT IS MADE OF POLYPROPYLENE, HAS AN OIL TIGHT INLET AND IS COLORED WHITE. THIS CLAVAL FLOAT HAD A SOFT TOUCH SCREEN ENSURING CONTACT IS NOT DAMAGED. THE HOSE HAS A WEBBING STRAP THAT KEEPS IT IN PLACE DURING USE.
This float is used with the Cla-Val Model 8905A Series II manual boiler. Float and rod assembly are made of stainless steel. Used in a bottom water supply application with coil balancers in natural draft burner installations. CF1-C1 FLOAT W/SS FLOAT & ROD
The Cla-Val 8901601J-OTC Float-Model CF1-C1 with Stainless Steel Float is used on a variety of hot water circulating equipment such as: domestic heaters, small commercial systems, pumping equipment, residential furnaces, and many other types of water heating and recirculation equipment
The Cla-Val CF1-C1 Float and Rod assembly is a Float & Rod for use with an air valve with MNPT x 3/8" connections. The float is adjustable for different pressures of gases. It fits into the control valve above the well vent eliminating the need for a separate air valve for different wells.
Cla-Val Model CF1-C1 Float, Suction, 305 Series (Open Tank)
This tank, equipped with an internal float and a stainless steel float/rod assembly, is designed for single-pipe residential water pressure systems. The rod, extending upward from the bottom of the valve, has a handle for manual operation of the check valve. The stainless steel float and its support bracket are attached to the end of the rod. Chamber dimensions are 13"W x 10"D x 4-1/2"H; valves have a 4" nipple outlet and 2" inlet port; stainless steel float rod extends upward from bottom of valve by 3-1/8"; ball height is 3". CF1
The Cla-Val 8901601J-OTC Float-Rod Assembly is a 1-inch and 1/2 inch pre charged diaphragm assembly with the hanger, swivels, rod interface and rod seal.