Air Pressure Switch
The air pressure switch is designed for ON-OFF control of the motor, such as air operated machines. In industrial and commercial applications, this air pressure switch is designed for general-purpose needs and offers a convenient solution to any on/off requirements that do not require proportional control or multiple stages.
The AFS Series Air Pressure Switch will monitor and control air pressure for single and multiple air compressor applications. Typical uses include: Instrumentation, OEM Control Systems, Scientific Equipment, Laboratory Automation, Oil Testing, Mining Equipment, Medical Gas Systems. Status LEDs indicate load conditions: On / Low Pressure / High Pressure and power to the device is isolated through an Active-High, Latching, Fail-Safe Power Trip.
This is Cleveland Controls AFS-227-161 NEW PRESSURE SWITCH 120/277V-AC 300VA 15A D300739. This product is an air pressure switch, and it can be used to use as single or dual stage compressor control. Additionally, the -161 switch has been designed with a terminal for connecting 5/32 inch (4.0mm) style solenoid valves, so it can be used as a valve air pressure switch as well
The AFS227 is a metal enclosed pressure switch with glass-filled polyester bonnet and solder terminals for use in air circuit applications. Designed for mounting on DIN rail working voltage 230V AC, 250V AC, up to 500 Volt DC.
Cleveland Controls Pressure Switches are used with air pressure systems. Use in water systems is not recommended.
The AFS-227-161 is a pressure switch with a configurable set point. It may be used to sense the loss of pressure in a pipe or sensing line, or operated manually via the ON-OFF-ON SPST toggle switch (normally open/closed contacts). The 2½ digit illuminated display indicates bar and kPa units of measure. The AFS227-161’s unique independent overpressure alarm circuit can be specified to activate upon the detection of either upper or lower
The Clevland Controls AFS-227-161 PRESSURE SWITCH is a plug-in air switch that may be used in a wide range of applications. It features an adjustable dial for setting the on and off pressure limits. The AFS-227-161 PRESSURE SWITCH has a disconnect terminal and an internal solenoid. It features an overfill indication, automatic reset and a pneumatic design. This item is shipped from our closest distribution center with stock.