Cleveland Controls DDP-106 2SPDT Dual Air Pressure Sensing Switch (.05 inch - 2 inch W.C.)

"AirFlowSwitch .07/2.0"" SPDT"

C

) The Cleveland Controls’ DDP-106 is a dual SPDT pressure sensing switch that monitors air pressure and activates a switching function when the preset point is reached

The Cleveland Controls DDP-106 is a 2SPDT (single pole, double throw) dual air pressure sensing switch with a SPDT (single pole, double throw) normally closed relay contact

The Cleveland Controls DDP-106 2SPDT Dual Air Pressure Sensing Switch (

Cleveland Controls AirflowSwitch

) is a dual pressure sensing switch that senses differential pressure across the two switch ports

0" SPDT features a T-slot mounting plate and 4-pin Low Voltage Terminal Block

) is the ideal switch for automatic ventilating, exhaust, or humidification applications

This switch is designed for use in areas where ambient atmospheric moisture is likely to collect

This 2SPDT (ON-OFF-ON) air pressure sensing switch is designed for use with air operated devices

Maximum working voltage is 24 VAC/DC

"The Cleveland Controls DDP-106 2SPDT Dual Air Pressure Sensing Switch (

This sensing range comes into play with the accuracy that is required for a long lasting installation, and it offers increased reliability over other types of switches

05" (1 cm) W

The switch is designed for use with low pressure systems (0 to 1" W

Cleveland Controls DDP-106 2SPDT Dual Air Pressure Sensing Switch (

, and an adjustable set point of 0

The mechanical relays are housed in a nylon enclosure and are rated up to 10 Amps at 120/240 Vac with SPDT contacts

Designed to sense negative or positive pressures and to function as a single pole double throw normally open or normally closed switch, this unit has a maximum operating pressure of 2 PSI

Prevents damage to equipment by sensing and switching off the power when high humidity or large volumes of water are present

to 2" (50 cm) W

The DDP-106 has built in overpressure and underpressure protection, which will not allow the direct digital output to be activated unless a set point has been reached

05 inch - 2 inch W

The sensing element has an adjustable differential of 0

) Air flow switch (1/8-2" WC)

)

This switch is designed to sense air pressure changes in commercial HVAC applications

1" (2 cm) W

They are used primarily in air conditioning and heating, ventilation, forced air systems, refrigeration, industrial applications and process control

Cleveland Controls DDP-106 2SPDT Dual Air Pressure Sensing Switch (

07/2

This switch senses pressure changes in a duct run and operates a motorized damper to maintain air flow at a preset level