CONBRACO 50-GB7-A1A 1-1/2" Dual Tapped (1/4) Gas Shutoff Ball Valve

"1 1/2""GasShutoffBallVlv1/4""Tap"

The CONBRACO 1-1/2"" Gas Shut Off Ball Valve recognizes the need for emergency shutoff valves to implement on a certain size lines that supply energy or control pressure to a variety of equipment used in industry. Constructed of schedule 40 steel, the top and bottom are equipped with 1/4"" NPT male inlets and outlets. It features two handle styles, upright dual handle and horizontal dual handle, along with a locking handle that can be screwed onto any side of the body preventing accidental operation. If handles were lost or damaged, they can be replaced without having to buy an entirely new body saving

A 1.5 inch gas shutoff ball valve is used for shutting off incoming natural gas supply. It can be used on RV, boat, furnace, etc. The chrome plated ball trigger handle with steel bonnet is weighted to assure ease of operation. Its connection size can be 1/8 or 1/4 inch male NPT or female pipe thread.

Our Conbraco Gas Shutoff Ball Valve is ideal for both residential and commercial applications. It features an easy-to-adjust knob for precise control of flow. The high-quality chrome plated brass construction can handle the most extreme conditions to give you years of reliable performance. With 1/4"" nominal tubing connections, this gas shutoff Ball Valve allows for maximum versatility in your plumbing system.

This Dual Tapped 1/4" Gas Shutoff Ball Valve is used with natural gas lines.  It is designed to be used with standard dual 1/4" copper supply lines and is for use with a gas source that has a maximum working pressure of 150 psig at 70°F

CONBRACOS "Dual Tapped" (1/4 Compression & Full Female Threads) Ball Valve is used for Residential & Commercial Gas Shutoffs.

Dual tapped ball valve with 1/4" NPT male flare gas inlet fitting and 1 1/4" NPT female flare outlet fitting. Helps to regulate the flow of gases from equipment to line and has a flow capacity of up to 32,000 BTU's per hour. Meets American Gas Association (AGA) ANSI Standard Z21.12 requirements for natural gas use.

Highest Quality A-Grade 304 Stainless Steel Ball Valve made by CONBRACO. Made to the Most Current ANSI B16.4 and D2566 Standards. Engineered with an Automotive Style Lever handle. The Highest Temperature rating for a ball valve at 150 degrees F (66 degrees C). Features a Straight and Elbow Gate Outlet that fits 1/4? Male NPT connections (codes 0000 to 16). Anything else is just second rate.