SOUTHBEND F10469 CONTROLLER for - Part# ()

Controller, 7-Pin

This controller works with 7 pin electric models and replaces the obsolete controllers.

The SOUTHBEND F10469 CONTROLLER allows you to connect 7-Pin heating controllers to your 500 series multi-zone fireboxes.

Consists of (1) wiring harness with (1) 7-pin connector and (1) metal bracket. Replaces the following parts: # 104213, 1041586, 1041587, 104214 (This item # is for a single controller).

Control Temperature with Ease The F10469 controller is a 7-pin unit. The large 7-segment LED display and simple rotary knob allow you to control temperature with ease.

The F-10469 Controller is a 7-hole Rheem Zone Control, non-programmable controller. The controller supplements the zone valve's thermostat to control the flow of hot water in response to demand by circulating water from the boiler through the zone valve. This helps avoid operating backup electrical elements for short periods of time which could actually increase electrical consumption and result in higher utility costs. The Controller also allows the installer to easily service the zone valves by providing a means to remotely isolate or open all active valves without having to turn off power at the boiler or service call charge.

The F10469 controller will allow you to control your gas or electric oven from a remote location. Here are some of the features for this controller:

The South Bend 10721 series controllers are designed to control up to 3 heating zones. Each zone can have it's own temperature setting from off to maximum desired temperature. There is an adjustable delay off feature that can be set to 20, 60, or 120 minutes after the last controller activation. This controller will also display time of day and allows for factory or field reprogramming if necessary.