Amana HKSC20DB Goodman 20 kW 240 V 1 Phase Electric Heat Kit w/Circuit Breaker

Electric Heat Kit, 20 Kw

An electric heat kit for Goodman appliances that feature an optional 20 kW heat strip for under-balcony, floor and attic spaces. Ideal when the outside weather is below 40 degrees F, to keep the inside habitat at 70 degrees F, or higher. Easy to install, just plug into existing thermostat wires.

Our HKSC20DB electric heat kit provides an additional 20 KW of heating energy to your HKSC10DB and HKSC10DBL. The HKSC20DB connects directly to the HKSC10DBL or HKSC10DB, without the need for a separate controller.

Have an electric fireplace with no heat output? This 20KW replacement kit will add the cozy heat you crave. Whether it's a winter beach house or just a room without any heat source other than your fireplace, this handy and powerful introduction to the world of forced-air heat is the perfect addition.

The Corporate's Electric Heat Kit, FS series is equipped with three-in-one function to meet the user's diverse needs. The Electric Heat Kit has a forced air convecting fabric heating element and a 900 watt infrared ceramic heating elements for quick heat up and even heat distribution.

This Basic Series HKSC20DB heat kit has a maximum heat output of 20,000 BTUs and is designed to provide supplemental heat to a single room of up to 1,200 sq. ft., or 460 sq. ft. per zone when zone controlled. The new Comfort Alert button lets you know the instant your room reaches a comfortable temperature and the equipment shuts off.

This heat kit is a self-contained, thermostatically controlled, and fully automatic unit for heating process air or other gases. It consists of a Standard induction motor and a rewinding starter in a thermoplastic enclosure. The NEMA 1X cabinet is mounted directly above the heat exchanger and receives heated air from it by convection. The temperature of the receiving air can be set roughly by the selection of an inlet air duct connected to a duct-type heater with either aluminum or polyester fins.

Comes complete with control box, mounting plate with pre-drilled holes and conduit. This kit can be easily adapted to fit almost any existing barbeque pit to derive the full benefits of a high quality electric heat barbecue. Please note that this is an optional accessory that is not required for the operation of the barbecue; however it is suitable for all models of kamado-style hibachis currently on the market. If you would like to add an electric barbeque heater to your existing kamado you may need a larger model which is available at extra cost.

This kit is a 165,000 btu electric space heater, with a heat setting of 1100w (max) and 870w (min). The temperature setting is adjustable between 65° and 85°.

At HKSCo, we have a real passion for fire. For over 25 years, our warmth solutions have been keeping people warm by converting the heat from their gas fire into electrical power, which they can then use to power a wide range of heating appliances in their homes: with HKSCo, it really is all about heat.

Comes with a 10' flexible electric heater and sensor controller for the RTC15" Resistive Heating Chamber.