Amana HKSC25DC Goodman 25 kW 208/240 V 1 Phase Electric Heat Kit w/Circuit Breaker

Electric Heat Kit, 25 Kw

Looking for a cost-effective, clean way to warm spaces? This electric heat kit will do just that with ease. With a 25-kilowatt capacity and built-in transformer, it provides you with the warmth necessary to heat apartments, shops or even pubs and restaurants. Including functional switches, this heat kit is easy to control even when left alone, making it your go-to heating system for any space.

Turn your pellet stove into a heat generator with this 25kw electric heat kit. Has an efficiency of 80%-90% and a 90%+ heating range.

Interested in adding a 25 kW Commercial Electric Heating System to your vehicle? If so, you've come to the right place. Sport Touring offers easy-to-install vehicle heating kits that provide quality and efficient heat for added cold weather comfort. All of our kits are mobile-market tested – which means we have tried them out in an actual vehicle, ideally yours.

This heat kit comes with everything you need to get the job done right. For example, 25-kW auxiliary boiler, aluminum vertical steam coils, 150 psi steam gauge pressure regulator, stainless steel drain valve and packing nut, 3-in. 1/2-OD (SCH40) brass threaded spigot tee with welded flanges, and 2-in.-OD (SCH40) brass female pipe to male compression tee.

This replacement electric heat kit is used to convert your Kenmore oil burner for use with electric heat. The kit is safe for forced hot air and non-forced hot air forced hot air indoor furnaces, including some models from Sears and M&S. The heat kit replaces the standard 125 gallon per hour pump provided with your furnace and burner system.

Heating your home just became much easier with the HKSC25DC 25 Kw unit. Simply plug it in and monitor the easy to read digital temperature display. The built in fan circulates air for a more even temperature distribution keeping you comfortable no matter where you are in your home.

The HKSC25DC heat kit is big on value and long on service. It includes a 25,000 BTU/hr forced air heater with non-superheat design that's ideal for any room in the house (up to 2,250 sq. ft.). Wall-mounting hardware is included. The fan is mounted on an adjustable yoke for direct placement of heated air and control of comfort level. A multi-speed 900/1,200 watt fan provides forced airflow and may be used as a stand-alone unit or as a supplemental heater to enhance the primary heat source. Also included is a door kit

Our kits are specifically designed for the most popular and available oil fired hot water tanks. Our heat kit kits provide one 25,000 BTU stainless steel tube electric heater to be used in conjunction with your current 240 volt supply line. For maintaining a water temperature from 85° to 130° F, and is intended for single family residential service only.

This heater is a reliable, affordable and safe solution for warming an area up to 1000 sq. ft. It also includes a 25 kw element, 40 ft. 7/3 LRD cord with plug, thermostat control and 30-Gallon steel tank with 10 ft. hose assembly.

The HKSC25DC is a complete electrical heating system that can be used in conjunction with the HKEXC range of water filled electric radiators. It consists of a 200mm x 400mm low temperature fan, 25Kw heat elements, adjustable limiting thermostat, pre-wired 5bar pressure switch, silicone hoses, terminal block with connecting leads and a carrying handle. With this kit, plug in and you will have your radiator heating ready to go in minutes!

The HKSC series heaters are designed for large rooms with a high ceiling. The unit provides up to 25 kW of heating power, air flow control and portability.

This product is used to space heat in a separate area.