Milton Industries MIL733 Milton 733 3/8" MNPT M Style Plug - Box of 10

COUPLER P M MA 3/8

The Milton 733 M Style COUPLER features: Two Leg Socket Assembly, this plug is designed for use with gas, oil and water lines in general purpose applications. It has an internal sealing ring to protect the male threads from dirt and other foreign material.

A coupler designed for high pressure gas lines and water lines. Made from forged brass, the plug has a 3/8" MNPT male inlet.

The MIL733 is a manifold connector commonly used for 1/4" and 3/8" CPVC gas supply lines as well as 3/8" polybutylene (PB) supply lines. The MIL733 features a 1-1/4" length to accommodate the additional length of 3/8" lines and versatile coupling method that allows the use of both screw-type fittings and male connector hub.

The easy-to-use design of this coupler simply requires reverse threading on the male end, then hand tightening until a slight resistance is felt. The MIL733 features 1/8" female pipe threads.

M Style MDPE Male Adapter x 3/8 Inch M style Female Equipment Thread. Metal Connector Assembly designed to adapt 1/4 inch to 3/4 inch copper water tubing to 1/2 inch outer diameter (O.D.) polyethylene (PE) Water Distribution Pipe. Commonly used in irrigation systems that supply agricultural crops.

The MIL733 is a M style plug with a steel body and 3/8" MNPT male thread. The main body is constructed of malleable iron and plated zinc for strength, durability, and good electrical contact.

The Milton 733 M Style Plug is an early version of the ubiquitous Milton 733 plug. This version of the MIL733 has a smaller hex on "M". The MIL733 is a 1/4" compression fitting which has the same thread as NST, Wz, and MPT but does not have a 360 degree flare like NST. While this plug does not accept aqua-stop plugs, it does accept these popular 1/4" plugs: