KMC/KREUTER CSC-2003 CSC-2003 VAV CONTROL; DA/NO REPLACES SIEBE 2

VAV CONTROL; DA/NO REPLACES SIEBE 2

The CSC 2003 is a 230 volt, 2-stage electric valve actuator for controlling air volume in heating and ventilation applications. The CSC 2003 provides short-time override and switching speed of less than 1/2 second. The design features a heat resistant handle with soft over centre and non-rotating spindle ensuring safe operation and reliable operation even under severe operating conditions such as solenoid valve spalling. The weight of the KMC/KREUTER CSC-2003 VAV CONTROL; DA/NO REPLACES SIEBE 2 is approximately 3.450 lbs.

For use with VAV systems. Replaces Siebe 2. .

Siebe-Brooks can now offer the CSC 2003 VAV Control and our previous KREUTER VAV replacement model EXP2031 S as part of its renowned stock range. These devices are fully guaranteed by Siebe-Brooks. All repairs and returns are undertaken on our site in Stoke by qualified personnel. Technical support is available 0870 008 6366 (UK) or 0800 008 6366 (Ireland).

CSC-2003 Control for VAV systems, 1/4" NPT connections, Compatible with KREUTER RA-2103 VAV Boxes, Plastic housing, Front Mounted Dial & Index - Blue

Our VAV controls are used in many commercial applications. These units should be used when you need precise, fully isolated control of the flow to your fan-coil unit

Enjoy ultimate control of temperature with the KMC Control System. Use either the open loop system or closed loop system in conjunction with your KREUTER VAV unit to raise and lower your desired room temperature by 1 degree.

The DC controller is a single-channel, single-station switch with NO/NC contact. The CSC controls dampers separately.