EATON C25DND330T Cutler Hammer- 24VAC 30AMP 3POLE CONTACTOR

24VAC 30AMP 3POLE CONTACTOR

The Eaton Cutler-Hammer C25DND330T is a 24VAC 30AMP 3POLE CONTACTOR from the C25 Series. It provides interruptions for selectable or non-selectable loads up to 60A and offers high short circuit breaking capacity. This contactor is designed for heavy applications and provides excellent long life in extreme environments. Products are guaranteed for one year, but are protected by a global network of technicians who can help you with any issues that may arise.

Eaton C25DND330T 24VAC 30AMP 3POLE CONTACTOR Cutler Hammer- The Energy Plus line of contactors cover 15 and 30 Amps with single, three Phase & four Phase Wiring configurations. This allows you to expand your Automation project as it grows. These contactors provide overload protection from continuous maximum loads and short circuit protection from repetitive accidental overloading. Each contactor is designed with a generally open ‘’NO’’ terminal, and

Eaton Cutler Hammer C25DND330T, 3 Poles, 24VAC 30Amp Contactors, Class D Can be used for general overload protection on motors listed in table 1, and for control of the EMD212 motor starter.

The Eaton Cutter Hammer® C25DND330T is a 3 pole, 24 VDC, 30 amp contactor. The unit features the UL508, CSA certified Class 2 circuit breaker, and has an ammeter trip with 20 second delay.

If you’re looking to turn your 3-wire branch circuit into a reliable, hard-working powerhouse, this is the contactor for you! This 24-volt 30-amp contactor features a 300,000 operation duty cycle and 126,00 holding current. It comes with an insulation class of B and secures to a steel box with screws.

The C25DND330T is a time delay reaction-type 24VAC contactor. The time delay is specified for 0.2 to 1.0 second and is factory preset in 0.1 second intervals. This means that the time delay can be adjusted using the front-panel adjustment (part of the mechanism). The contactor comes complete with a mounting base, which is used to clamp it by means of a bolt at any location on a heat sink, rail or rack. A

The Cutler-Hammer EATON CW25DND330T 1/2 HP 270/208-230/460VAC, three pole controller switch features a thermoplastic enclosure and a type 1 heavy duty steel cover. This contactor is ideal for use with motor starter applications requiring selective accessory control.