EATON E22B2 1- CUTLER HAMMER CONTACT BLOCK, 1NO, 10A, SCREW

"Contact block

1-cutler Hammer contact block, 1no, 10a, screw model-e22b2.

The Eaton E22B2 contact block has screw terminals, the spade terminals are removed to install new contacts. Contact block is made of copper alloy die casting. This contact blocks are used in a variety of applications and devices where built-in or user installed contact blocks, spacers, clamps, hold downs, ears may be required.

Replacing your old contact block? It is time to bring your installation into the present with the Eaton E22B2 “One-Cut” contact block. Install this internally wired one-cut unit to give your property a more modern appearance without sacrificing top performance.

The contact block is a positive on/off switching device that allows you to interrupt or re-energize electrical current. Contact blocks are used in load centers, panel boards, industrial control panels and as general use switch devices in junction boxes. Typical loads include capacity lighting, convenience receptacles and charge-type receptacles.

Contact blocks are used to allow electrical contacts to be wired in parallel, or "daisy chained”. They allow quick wiring of contactors, solenoids and other electrically operated switches.

Replace the contact block for your Eaton Cutler Hammer pushbutton switch.

The Eaton E22B2 1-Cutler Hammer Contact Block is an industrial grade contact block that provides a current path for electrical currents from stationary contacts to moving contacts. This tool provides 1 NO, 10A of contact and comes in a variety of standard NEMA configurations.