Eaton H2015B-3 29-34 Heater Pack 29-34 Heater Pack

29-34 Heater Pack

The 29-34 Heater Pack is a jumper and defrost. It is a one line electric heater for discharge and supply pipes with aluminum free discharge pipe and no gasket on the discharge pipe. The 29-34 Heater Pack is 2" wide electric heater designed to be strapped inside the water pipe. It is 600 watts with a heavy duty ceramic heating element and high temperature limit control that is set at 210 degrees (100 degree C)

The 29-34 Heater Pack has been designed to operate on the heavy duty Eaton truck line of trucks with a model year of 2007 and newer. Compatible with many other makes and models, this heater comes in various configurations including manual rolling, remote start and integral mounting. Whether you need heat for a sleeper cab or full size cab, the 29-34 Heater Pack is engineered to fit practically all trucks made today.

This 29-34 Heater Pack from Eaton comes with everything you need to power a workspace, including a 115V single phase circuit breaker, an inlet box with a 30 Amp Receptacle and a 36-foot 8/3 SJT cord. The heater pack runs on 208/240V single phase with 60 Hz, and is capable of heating up to 1000 square feet for up to 30 minutes per hour.

The 29-34 Heater Pack is a 29k BTU (3500 watts) heater, and can be used for heating shelters, tents and mess halls. This heater comes in two pieces which makes it easy to transport and ideal for military or outdoor use. The H2015B-3 has a wireless thermostat and wired control and is constructed of full standing seams and welded pressure relief door with threaded stainless steel latches.

With the Eaton H2015B-3, you have the power to do more with less. Now you can work smarter by moving your employees around faster and helping them stay comfortable with modern HVAC systems. This 29-34 Heater Pack can be used in light-duty applications that require airflow up to 3,400 cfm at 90 PSI.

The Eaton H2015B-3 29-34 Heater Pack is a control board designed for quickly heating up small rooms and spaces. This pack includes a firebox and blower assembly with an airtight door and ventilated dampers for easy installation. The electronic ignition of the H2015B-3 allows for easier installation and can include a room thermostat for more climate control.

This pack provides a supplemental heat source for your 29-34 CS unit to extend your heating season.

This ToughCart has rugged wheels and a rugged transcontinental drive package especially for the rugged homeowner who plows snow and hauls other equipment back and forth. Packages include: 2934 heat pump heat exchanger, 29LT50 air-cooled scroll compressor, 20HP, 208/230V, 3-phase motor with 1/3 phasing coils (fits 1/15 hp to 2 hp motors), F1AM4 condensing unit with TopHat cabinet, 5' fan discharge piping, gas valve, thermostatic expansion valve and refrigerant charge (R410A, 10lbs).

Whether you are working the big game in freezing weather or have an overactive family that leaves you with cold toes, this innovative 10,000 BTU heater pack is a must-have for your next hunting trip. Locate the hot zone directly on the side of the pack, where eight heat packets are safely stored, and simply pull out one to activate. The heat packets are durable Low-Odor solid gel packs that warm up in minutes while emitting little to no scent. Once activated these packets can last 2-3 hours each. With this innovative design you will stay warm and out of the cold while remaining undetected

Turn your electric unit to 39,000 BTUs

The H2015B-3 is a three sectional mobile heater designed for comfort heating and cooling of light trucks and commerical vehicles.

Versatile - Runs on 110/240V AC which allows it to be used on Diesel engines, gas engines, co-generation systems, and natural gas-powered generators.