EATON XTCE025C10A Cutler Hammer- 120V 25A 3P Contactor 120V 25A 3P Contactor

120V 25A 3P Contactor

The Cutler Hammer XTCE025C10A is a 120V 25A 3P Contactor. This product operates within a temperature range from -40°C to 85°C. It has a Form A case and can accommodate M8 terminals. The cutler-hammer type is XTCE025C10A

120V AC, 1Ø, 25A, 3P, Contactor (contacts included)

The XTCE025C10A is a 120VAC,25A 3 Pole Normally Open Contactor rated voltage at 480 VAC, 60Hz. This product has been tested to NEMA standard C107 (Fluorescent) for use in Hazardous environments. This product is typically used in indoor non-hazardous locations such as control panels, disconnect switches, and motor controls.

The Eaton Cutler Hammer 3 Pole 120V 25A Mechanical Contactor XTCE025C10A is a molded case switch. It has symmetrical Class 2 terminals, and it is rated for a maximum of 15 cycles per minute at 60Hz.

Built to last, the 3 Pole 120V 25A Contactor has a compact case design and is ideal for switching heavy-demand motors on and off such as water heaters, pumps, or compressors. The internal and external current ratings are both 25 Amps with voltage of 120. Backed by a 15 year limited warranty to ensure your satisfaction.

The XC25C10A mutipurpose Contactor is a single phase 25A, 120V split-phase industrial miniature molded case circuit breaker. It has an off state capacity of 200mA, and is for use in control and measurement applications. The XC25C10A is used in various equipment such as trunks, closing and leveling systems, controls from XENON Electronics.

The Eaton Cutler Hammer 25 Amp 3-Pole Utility Grade NEMA/IEC Standard Enclosure Contactors feature an electromechanical, 120-volt, 2-pole normally closed switch. These contactors are designed for use in nonhazardous locations and have a current rating of 25 amps and a voltage rating of 120 vac.