Danfoss 042N0185 24-240vac ET20M TIMER 0-45min

24-240vac ET20M TIMER 0-45min

24-240vac ET20M TIMER 0-45min

Danfoss 042N0185 24-240vac ET20M TIMER 0-45min #

Danfoss 042N0185 24-240vac ET20M TIMER 0-45min _________________________________________________________ ___________________________________________________________ Danfoss ET20M Timer Relay Module Relay contact rating 2 Amps @ 240VAC Phase current 1 - 1/2 22,000A Trip time from 10% to 90% of rated current 10ms Maximum operating voltage 400V (50Hz) Maximum operating voltage 600V (60Hz) Environment temperature -40 C to

The Danfoss ET20M 0-45 min timer can be used in HVAC applications as well as drip and micro irrigation applications. The Timer is a 24-240 volt (AC) non-programmable timing control that can be set from 0 minutes to 45 minutes. The timer features an adjustable on duration of 10, 20, 30, 40, 50, 60 minutes or 2 hours in increments of 1 minute and an adjustable off duration of 5, 10, 15 or 20 minutes

The Danfoss ET20M is a two section for the individual connection of heaters and fans. One section is dedicated to heating and the other is dedicated to cooling. This timer control can be used in conjunction with the TIMECO heat controller as well as the Astrink Cooler control to provide flexibility within industrial applications. ET 20M 008-060 V 0-45 min 0-250 C 1 Pt 100 PSIG 2

Get yourself a timer to control the time your equipment runs. We have an ET20M Timer that can be set for 0-45 mins. It's helpful with limiting the hours of use, as well as checking up on operating hours after use.

ET20M TIMER series Timers control heating, ventilation and air conditioning of various facility applications. ET20M TIME controller is a control device which monitors the signals from the input sensors and turns ON & OFF the output devices according to their settings.