Danfoss 060L118466 KP78 THERMOSTAT CONTROL KP78 THERMOSTAT CONTROL

KP78 THERMOSTAT CONTROL

KP78 Thermostat Control THERMOSTAT CONTROL –: Brand New :– ( Danfoss ) ˜

This is a Danfoss 060L118466 KP78 THERMOSTAT CONTROL for the Model A/B Air Conditioner. Model Number: 060L118466

The Danfoss 060L118466 KP78 THERMOSTAT CONTROL is a basic programmable, variable speed, forced air furnaces and heat pump thermostat, designed for commercial and residential applications. This thermostat comes with a 5-volt terminal for connection of the host interface. The 060L118466 thermocouple housing and heating element are combined into one unit. This thermocouple does not feed back pilot voltage, so the circuit board is powered only when the furnace has active control. Because of this circuitry, push buttons, alarm contacts, and communication hardware must be wired

The Danfoss KP78 is a single phase thermostat control for other Danfoss KP78 products. The unit can be fitted with low or high input or output combinations for hot water, and represents a simple control of hot water at a desired temperature.

The Danfoss KP78-TH replaces and adds functions to the older 060L118466 thermostat control. Available as a standard Fan/Heat thermostat with temperature range of 35°C to 90°C (32°F to 194°F) for 208V 3-wire systems, wired for 24V system or wired for 220V system, or as a redundant thermostat with same characteristics as the standard model.

Keep your home comfortable all year round with Danfoss RoomThermostats. The KP78 is an easy-to-use digital room thermostat that allows you to make precise adjustments to preset temperature limits and 5 different program types.

The Danfoss KDP78 series is a two-stage thermostatic mixing valve with a soft start. It has an insulated body and can be mounted either horizontally or vertically to suit the installation. The KDP78 will operate under conditions ranging from -30°C (-22°F) to +80°C (+176°F). The valve is controlled by the ambient temperature.