Danfoss 060L201766 "-15/60f Temp Control; 80""Cap" "-15/60f Temp Control; 80""Cap"

"-15/60f Temp Control; 80""Cap"

The Danfoss -15/60f, 80""Cap" controller is suitable for residential installation in a variety of heating and cooling systems. The controller can be used to optimize the comfort settings in a home, as well as set back the thermostat as needed to save money.

The DFAC Series -15/60f temp control is 80" capacity. The DFAC is a free standing air conditioner that utilizes no ductwork to cool spaces up to 3,800 sq. ft. This 40 ton unit has a single pass, belt driven compressor with a 2-stage internal scroll for reduced noise and vibration while the cyclone separators reduce the sound levels further.

The Danfoss 060L201766 is a 50/60 Hz control, 200 to 240 VAC input, +/- 15/60°F temperature control with a 4.0"" cap for use with the Moxa NPort 5110i, Moxa NPort 5200i, and GE Proximity PLCs.

Danfoss single compressor 060L201766 is a direct line mount variable speed scroll compressor. The 060L201766 is a reciprocating compressor that has an end mounted electric thermostat with 21 mounting flanges used for casing mounting (round) 80"" cap, 208/230v, 1 Ph

For cooling and heating systems that must work under extreme conditions, Danfoss' plus models are frequently the answer. With multi-stage compressors that operate within a range of -15° to 60°F, these compressors are ideal for applications that require a wide temperature swing.

The Danfoss VLT1011 Low Voltage Thermostat is a compact, outdoor reversing valve for heat pump water heating systems. It offers a wide range of operating conditions from -15 to 60°F, and is used to control a proportional mixing valve or orifice for radiant floor heating.

Accurate temperature control is critical for use on cooling systems operating at low nominal flow, where refrigeration compressors are oversized. This End-of-Line (EOL) controller allows a system to be charged with the last available cooling energy and then maintained at a target temperature by finely controlling the compressor no-load speed. The modular design provides for service and recharging in the field.