Danfoss 063G1349 "4-20mA

"4-20mA

The Danfoss 063G1349 is a module with 4-20mA output. It has an interface giving the user access to registers in the module, i.e. reception of status signals or correction of outputs, or start of an operation in the module. It also has commands for automatic monitoring of the output signals of different actuators.

The Danfoss 4-20mA is an outdoor integrated control with 2/4/8 point detection for connection to indoor microprocessor. It can be used in humidified rooms at temperatures ranging from -40 to +55 °C, the detection range is 0...511 mA. The signal delay time depends on the flow rate and the filter in the building. The control will deliver up to 50 mA when connected to one set point or connected to two points in parallel. The number of connected points directly impacts the accuracy of flow measurement, but it does not require any external components.

The Danfoss 4-20mA is a part of the Danfoss Family of Products. It is a thermostat that senses temperature and controls an HVAC unit by turning electric devices on or off to control room temperature.

The Danfoss 063G1349 is a 4-20mA module and cable set. It communicates digital commands between the controller and the valves, pumps and other process equipment that have been designed for use with the system. With the ability to maintain communication from controller to valves up to 1000m away, it can be used in a variety of diverse applications. This single channel input module has a maximum distance of 1000meters from controller to valve.

The Danfoss Elta 4-20 mA Temperature Controller is a proportional linear temperature controller that allows for heating and cooling control of various types of refrigeration and air conditioning systems. The controller offers direct 0-10 Vdc, 4-20 mA and Pt100 relay outputs as well as a 32 bit onboard temperature sensor. The front panel features an input menu to allow the temperature sensor type to be easily changed."

Contactor protection for 3 phase motors up to 4.2kW.

Compact position sensor

The Danfoss DT63G1349 module is just one example of the Danfoss Multidrive family of products.

Moisture Sensor (0400)

The Danfoss eQ-T controller is made for comfort air conditioning systems. It uses the latest microprocessor technology to monitor and control base mounted, single stage, or multi stage cooling, heating, or combined systems. Its accuracy of 0.1C/ 0.5F is within 2% of the set point, which saves energy by reducing compressor on time and noise/ vibration levels. The integrating function of the Danfoss eQ-T controller takes curve fitting out of calibration.

The market leader in building automation systems"

The Danfoss 063G1349 is a thermostat and sensor combination. This one component can control many functions. The thermostat control is used to maintain the temperature desired and the sensor switch is used to monitor the temperature or room air flow.