DC THERMOSTAT AT0E-2559-1 ACCUTEMP

DC THERMOSTAT

NT-100C DC THERMOSTAT ACCUTEMP. 25-59 F HIGH LIMIT AND 9-49 F LOW LIMIT

The DC Thermostat AT0E-2559-1 ACCUTEMP is a fully programmable, 2-stage capable thermostat to maintain semi-hardened, precast concrete slabs at the differential desired for the various curing stages of construction.

The DC Thermostat is a multi-stage heating/cooling thermostat designed for wall or duct mounting which has been specially wired to increase energy efficiency and lifespan.

The DC Thermostat AT0E-2559-1 is your all-in-one controller for maintaining a constant temperature in your grow room. This thermostat has a backlit display screen for easy setup and features a digital setting with remote control capabilities.

The DC Thermostat AT0E-2559-1 combines a well-known name in thermostats with a new technology that exceeds the high standards of an industry leader. It provides twenty-four volt control with a full line voltage transformer. The AT0E-2559-1 ranges from minus forty to plus one hundred degrees Fahrenheit. A self resetting manual trip mechanism will disconnect power should the ambient temperature exceed, or become less than, 135 degrees Fahrenheit or 40 degrees Celsius respectively.

The DC Thermostat is a self-regulating, programmable thermostat with a display that uses red and green to indicate when the desired temperature has been reached. It allows for continuous control of temperature between -17°F (-27°C) and 122°F (50°C) for up to 24 hours. Ideal for maintaining precise temperatures during cold weather or water extremes causing temperature variations in aquariums.

Designed for round-the-clock temperature control, the DC Thermostat allows you to precisely set a target temperature and then use the remote sensor to receive a temperature update. A wireless remote control lets you conveniently adjust the temperature from across the room. Programmable digital display shows both current and set temperatures from both remote and base units.