Deltana CSA12U3 DEL US3 BRASS 12 IN CASE STAY ADJUSTER

Deltana CSA12U3 12" Casement Stay Adjuster, Bright Brass Finish

The case stay adjuster has a 1/2" -12NC straight threaded stud with lock nut and washer and features a spring-loaded nylon bushings to hold the window in any open position. The CSA12U3 12" casement stay adjuster is meant to be used with steel or fiberglass windows.

Need a simple way to adjust your casement stays up or down?Then try the Deltana 12" Stay Adjuster. This handy little accessory adjusts the length of most any stay and can be easily adjusted with a screwdriver. Replace your existing brass stay adjuster with one that looks great, and make it easy to adjust your casement inside mount window stays.

Closing a Casement window with the stay attached to the hinge produces a lot of friction and heat. In this situation, the stay wear strip becomes so hot that it glows red in color. In order to solve these problems, we devised a new wear strip and added a cold rolled steel guide, which are pre-assembled at our factory and securely installed to the case. This simple yet effective design results in ease of operation and longer guide life for homeowners who may not be able to afford annual or bi-annual professional maintenance performed on all of their casement windows. The patented Deltana CSA12U

The CSA12-U3 is a highly visible, one piece constructed stainless steel device with a factory brass plated finish. This is the only stay adjuster available that supports increased weight capacities without the use of additional hardware. Using 3/16" I.D. aircraft cable, this unit is able to accommodate up to 100 lbs of weight ensuring a positive cable tension and casing closure

Shown with the 2215U3 CSA15U3 Stay Adjuster (sold separately) and all other Stay Adjuster parts for use with casement windows only.

If you need an easy way to install a casement stay, our adjuster ensures precise positioning and ideal strength. Built of heavy-gauge brass, it mounts easily. And it's available in four finishes to match a stay or other hardware.

This stay adjuster is constructed of solid brass, with a bright brass finish.