DiversiTech CP22LP Cond. Pump Low pro. 22Ft Lift

Cond. Pump Low pro. 22Ft Lift

The 22ft Condenser Lift is ideal for high rise applications and gives you a low profile alternative to using stand pipes or water level switches. The Condenser Lift when used with the 28ft Condenser Return will give you the ability to install your condensers outside of your home for increased cooling capacity in South Dakota's harsh summers.

The Diversitech Cond. Pump has a lift capacity of 2,200 gallons per hour. It covers a large area and can be used with dangerous liquids. This pump is ideal for many industrial applications including wash down systems, air compressors and many more.

The Diversitech CP22LP Cond. Pump delivers 2196 GPH @ 0' and multiple energy savings features to lessen operating cost and improve reliability. It also sports an extra deep float switch trip level to reduce the amount of in-rush current when initially activated by a remote switch or contact. Capable of well over 10 hours operation on 12VDC, this pump has a field selectable mechanical relay that provides automatic ON/OFF control of electrically controlled accessories, or can be set to cycle itself ON/OFF for various applications such

This Commercial Grade Condensate Pump will send condensation from your home back to your humidifier. The unit is low profile and easy to install with the included 22' of copper line that can be cut to fit most applications. For use with qualifying Evaporative Humidifiers (e.g. Wood, and Floor).

A low-pressure, vertical suction pump that will provide 22ft. lift in potable water applications. The CP22LP is suitable to lift water from a depth of 4-7 feet and operate in temperatures down to 20° F.

The CP 22LP LP Condensing Pump is built tough to withstand the extreme conditions of sub-freezing temperatures without sacrificing performance. Flotec's industrial design makes for easy accessibility to the pump and simplicity when servicing or maintenance is required.

The Conductor Pump features an industry first, an inline motor that provides more power at lower amp draw providing up to 7500 gallons per hour @ 10' head pressure. The Conductor Pump is suited for the following situations: 1) connecting to a portable water tank in the same room as the pump; 2) installing inside or outside the return line when the application requires a foot valve on the return line close to the tank; 3) connecting directly to a well or spring source and backfilling water tanks when it's less convenient to move large volumes of water with traditional submersible pumps; 4) connection to basement