DOOR SWITCH for Vulcan - Part# 00-960053-00001

DOOR SWITCH for Vulcan - Part# 00-960053-00001

The DOOR SWITCH for Vulcan -- Part# 00-960053-00001 is a replacement door switch assembly kit containing a 2/3hp motor, TCOFET-70N controller board, and a dry contact kit for the control panel. These door switch kits are designed specifically for Vulcan door models listed below.

The FV400 and FV400XL use a TANGENT DOOR SWITCH with the following part numbers: 00-960053-00001 (120V), and 00-960053-00002 (24V).

The DOOR SWITCH for Vulcan is a Door Switch that mounts directly to the door and completes the Circuit when the door is opened. DOOR SWITCH for Vulcan has a rating of 20 A @ 120 VAC. DOOR SWITCH for Vulcan comes with a voltage rating of 120 VAC and a current rating of 20 Amps.

The DOOR SWITCH for Vulcan is a genuine replacement part. If your door switch is damaged and won't turn off the gas, you'll need to replace it. The switch screws into the control panel and has a sense wire that runs to the door switch opening on top of the oven.

This is the door switch for Vulcan ranges. This door switch mounts on the left rear wall of the stove cavity, by the oven door.

The DOOR SWITCH is used to detect when, for example, a garage door has been opened or closed. The DOOR SWITCH sends a signal either to the garage door's operator motor to open or close the door, or to an optional wall station transmitter to operate the wall station transmitter .

The door switch is a replacement for the remote control probe. This part plugs into our doors and when the door opens, turns off the fan and prevents the element from cycling on and off when the element thermostat is in its cooling or heating position.

Switch - Door This part is 7 in. L x 4 in. W x 2 in. H (152 mm x 100 mm x 51 mm) and weighs 0.62 lbs (0.28 kgs).

The Door switches are used for night light, light switch,safe light,elevator push button,etc.

---------------------------------------