HONEYWELL DP3060C500 DP3060C500 Deluxe Power Pro Contactor. Poles:

Deluxe Power Pro Contactor. Poles:

A versatile line of HONEYWELL DELUXE POWER PRO Series circuit breakers with the same high quality components and construction as HONEYWELL GFCI circuit breakers. In addition to products listed, custom-engineered DP3060C500 HONEYWELL Deluxe Power Pro Contactor. Poles:  options are available that include an eyelet trip and additional interrupting ratings.

HONEYWELL DP3060C500 DP3060C500 Deluxe Power Pro Contactor. Poles:

Honeywell Deluxe Power Pro Contactor. Poles: 1, Single phase AC or DC, Voltage Rating: 3.6 KV, Capacity: 4-40 Amps, Current Rating at Rated Voltage: 100/23A, Mounting Type: 2 holes with M8 thread or 2 holes with 62 mm C mounting hole Screw terminals

Honeywell's Deluxe Power Pro Contactor is a standard size single phase three position 220/240VAC plug-in contactor. It's designed for use in small to medium switchgear and offers a wide range of features that make operation easy and accurate. 24VDC output contacts with overload protection, low oil shutdown with warning LED, NEMA 4X enclosure rated for use in hazardous locations, microprocessor PFC with line reactor for superior power factor performance, high ambient operating temperature range, 20 through 187 amp current capacity.

Honeywell's DP3060C500 Deluxe Power Pro Contactor takes safety to a higher level. This industrial-duty, pre-wired contactor is designed for use in larger, more demanding systems with greater voltage demands. With up to 3 pole positions, this contactor lets you control high-voltage circuits from one location. You'll appreciate the convenience of an outlet on the chassis side that accepts a plug-in ground fault trip device or temperature controller for maximum safety.

Honeywell DP3060C500 DP3060C500 Deluxe Power Pro Contactor is ideal for control equipment in residential, commercial, and light industrial buildings. Contactor can be used as a stand-by as well as for switching loads on and off. Features include 30 Amp rating, 120/240 Volt, and 0.8 hp motor, 50 Amp overload protection device, UL Listed solder terminals and adjustable set points from 30 to 60 percent of full load amps.

Designed with superior power and performance, the HONEYWELL DP3060C500 Deluxe Power Pro Contactor will make easy work of all your outside lighting tasks. 1000 amps at 240V peak voltage, its power connector allows it to connect from 12-2/0 Gauge. This contactor comes with a built in mounting plate, is fitted with 1/4" quick battery disconnect terminals, and is prewired for either 120V or 277V operation.