DRAIN TUBE HEATER for True - Part# 801849

DRAIN TUBE HEATER for True - Part# 801849

The DRAIN TUBE HEATER for True replaces any hot water supply. It provides heat to all of the True Waste Systems, eliminating the need for auxiliary heaters. A dual fuel system allows for heating with gas or electricity.

Discover a new level of shrimp cleaning look no further than the DRAIN TUBE HEATER for True. Drain Tube Heater for True is an improved version of the original Drain Tube Heater, which accepts 275 watt heater element.

The drain tube heater is for use on select True refrigerators. These are the tubular style drain tubes that are specifically designed for True refrigerators with an electronic evaporator system. A drain tube heater helps prevent the formation of frost and ice. This is not for use with all tubing or all models, but for specific applications only.

The Drain Tube Heater is used in the True™ boiler to heat the condensate drain line. The low watt, 200 VAC input power heater has an aluminum enclosure that is fully insulated for ease of installation in the enclosed 6" drain line.

The DRAIN TUBE HEATER operates on 24 volts AC. The DRHN will provide an additional 5 to 15 degrees Fahrenheit of warm water to the shower or tub.

Heats the 50' drain tube in True refrigerators in all temperature ranges -40°F to 60°F.

The Drain Tube Heater keeps ice-maker drain water above freezing for quick and trouble-free draining. 120 volt.

Ever bring your boat out to the lakes and find that there is not enough heat to defrost the ice on your shower or drain? There is a cure for this problem and it's called the Drain Tube Heater. What was once a simple plastic drain tube will now be an uncomplicated water heater. The Drain Tube Heater will melt any ice that builds up on the shower or drain lines. You can customize this part to fit into just about any existing drain tube configuration. Defrosting tubes will now be a piece of cake!

The Drain Tube Heater is a vital component of the Residential Pool and Spa Covers. The heater is designed to offer an additional source of heat to the wet end of the drain tube. A correctly installed DTH can help eliminate potential problems associated with draining a pool, such as "freezing" or "sticking" covers. They are a low profile device that mounts on the wall of a covered pool near the drain or skimmer.

Heating water for your outdoor spas has never been easier. This single piece aluminum heater holds a 12 foot long 100% polypropylene drain tube which allows you to easily control water temperature and flow.

Attach this to the suction end of the pump, hook it up to a heater core, and your winterizing job is complete.

When added to your preheater and/or pump, this will heat your coils and heat transfer fluid. This will allow the water to heat faster and provide a cost saving feature to your operation. This tube is approximately 3 ft in length and will need to be adapted to the application.