JOHNSON CONTROLS
Johnson Controls 7636 DPM18A-602R DIAPHRAGM KIT FOR V43
DIAPHRAM KIT FOR 3 V43
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountSeatDisc & Diaphragm KIT
The SeatDisc & Diaphragm KIT 64711 is a solid cellulose diaphragm designed to replace fluid reservoir in the remote control assembly of the 64700 series intelligent transmitters.
The 64711 SeatDisc & Diaphragm KIT is a two pack product made to replace the original parts in controlling devices. The part numbers are 64711 Part Number DSC16A-602R Disc Assembly, 64712 Part Number DSC16A-602R Diaphragm Assembly, 64711 Part Number : 30HN005PJ701L, 64712 Part Number : 30HN005PJ701L.
Control the temperature in your car with this Johnson Controls 64711 DSC16A-602R SeatDisc & Diaphragm KIT. Keep the interior of your car at a specific temperature between 32 degrees F and 92 degrees F. You can install this kit yourself and take control of your comfort and fuel economy.
Johnson Controls 64711 DSC16A-602R SeatDisc & Diaphragm KIT. Replaces Johnson Controls part number 64711-DSC16A-602R.
The Diaphragm KIT fits 5/16" (8mm) orifice Johnson Controls SeatDiscs which are used in automobile seats for airbag deployments, part numbers 64711 and 74305.
The Johnson Controls 64711 DSC16A-602R SeatDisc & Diaphragm provides the very best solution to water leaks from your toilet tank. This product is a direct replacement for the OEM part. There's no complicated installation procedures, so you can save time and money with this quick fix product. Order today to ensure long-lasting results.
The Johnson Controls® 64711 DSC® 16A-602R SeatDisc® + Diaphragm Kit is a solenoid valve that fits the Thermal & Rechargeable Systems products. This kit is used with these systems to manipulate water flow through the second stage compressor. This system is best applied on refrigeration products that are 30 GAAC and below, refrigerators # of 1-6, systems < 75CFM, or A/C products of 1.0 to 4.5 ton (4 to 15 tons).
The Johnson Controls KS-223 Seat Disc & Diaphragm Kit fits directly into the control assembly. This part replaces the original diaphragm and seat which are designed to be replaced at the same time. The unit should be tested for leaks after installation by applying 1 oz of soapy water over the fitting. If bubbles are present, inspect for damage. The unit was sold without a top cover, but this part will work with your existing regulator/cap assembly which you can order separately.
If you've ever experienced a seat heat problem, SeatDisc can help. Just replace your stock seat heater with the patented SeatDisc and get back to enjoying heated seats. As seen on TV.
ClimaSol TM - A revolutionary waterless, non-toxic fluid based on a bionomic solvent. D.S.C.
Specifications:
Kenmore Elite 57215 Duet Sport Washer and Electric/Gas Dryer Combo, White